Viewing all customer Discussions for:

23-043 Mirror Door Roller, 1-1/4" dia.

I'm pretty sure we know which wheels to order but am confused as to what size to order. What would you suggest? The last ones were too small I think.

Wheel is 1 1/4 , I need 12 . I would like the whole part not just the wheels

Hi I have a closet door roller that is broken. The cupped nylon part is gone so I need a new assembly. Based on the parts I see you have, the 23-043 roller looks like the one I need. I have the door removed however the assembly doesn't come out. The roller assembly is sandwiched into the frame ,mirr ... (cont.)

Hello,Based on your dimensions, our 23-043 seems like a good match but make sure to compare the dimensions on our product page to yours to confirm. Though it's not a requirement, if you want to stick with steel wheels you can purchase the 82-226 81-266 roller and axel kit to switch out the nylon whe ... (cont.)

No markings. Wheel has a 1/4" inside width for track

Hi I am looking for a replacement roller for a mirrored closet door roller is approx. 1 1/4 in wide and the roller assembly is approx. 3/4 in wide by 2 1/4 long the assembly is flared on top to slide into a track on the mirror frame and there is a slot for a screw at the opposite end to the roller f ... (cont.)

Do you have what I need ?

This house was built in 1981 and these are from the mirror sliding closet door and the rollers aren't rolling anymore so I'd like to try and replace them.The only markings on them are DEL MAR ENG.448-2.Thank you so much for your time.Norma

Need replacement wheel/bracket for a mirror sliding closet door.

I need 8 if these rollers for very nice but heavy sliding, mirrored close doors. I will send a picture BUT mine are similar to your #23-043 or 23-198 except the back is raised on the diagonal.

Nylon roller appears to be 1 1/4", but could have been larger originally. There are no other markings on the doors or the rollers other than the above label. Examining your pictures, the 1 1/4" and 1 1/2" look as if they may be interchangeable. Is that an accurate assessment? I noticed that the 1 1/ ... (cont.)

No part numbers or markings on the part. 1 1/4" nylon roller but they are old and broken. I don't know if it's possible if they were 1 1/2 or 1 9/16 and have just worn down. Looks like 23-043 but is only 2" long vs 2 7/32", offset for bent flange at top is 5/16 and not 5/32, also rivets are reversed ... (cont.)

I have a broken roller on my large bedroom glass sliding doors. I took it off the track and found the broken roller on the bottom of the door, there was a screw on the side of the door that adjusts the wheel. . I took the screw off thinking it would release the wheel so I could replace it , but that ... (cont.)

Challenged to find this specific replacement part for my mirrored closet doors. Thanks for any help!

Hello, I'm trying to help someone find replacement closet door rollers. I've attached 2 photos of a p\n 448-3. He said on the wheel is the number N-605 if that helps. I would like to see what it takes to get him 4 of these rollers and the felt strip for the top of the door. Can you help? I will try ... (cont.)

I am trying to help someone with even less tech-knowledge than myself to order 4 replacement closet door rollers. look forward to hearing from you soon. If you respond via email, please use the same subject as above so I know it is not junk mail.Thank you,Tony

I'm having trouble tracking down this mirror closet door roller. Any help you can offer will be a big help. If not Swisco, do you know where I can find it?

I need to replace these rollers for a Monarch mirrored closet doors. The plastic cover has broken off the metal wheel. I can email you a photo. Your red button for photo uploads does not work

I ordered part 23-043 as it appeared to match the broken part, based on measurements I took and compared before I ordered. Both parts appear nearly identical on comparison when I received them. However, when I attempted to install the new part, I discovered that it is slightly wider in one place t ... (cont.)

Hello, I'm needing some help with some rollers please. The large one is an ACME 4011 and I need 4 of them. I would also like a gold track for that style roller (two channel). The roller I'm having a hard time finding is the smaller one. I don't see any part numbers or anything on it. I've tried to i ... (cont.)