Viewing all customer Discussions for:

23-047 Door Hanger, 1/2" offset

i just purchased your part 23-047 for my sliding door. the part does not fit as the flat edge nylon wheel is a hair too big! also, my wheel has an angled edge on both sides rather than a flat edge. i have several closets with sliding doors, and the 23-047 does not fit in any of the door slides (ag ... (cont.)

Hi, I need to replace the hardware on my bypass doors. Let me know if these pictures are enough and if you need anything else from me. Thanks, Roberta

I purchased two sets of Closet Door Hangers with 3/4"roller wheels(Swisco item# 23-047)well over a year ago to replace some missing hardware for my bypass closet doors. Unfortunately,the existing track on the closet only accommodates a 5/8" roller wheel. Therefore, I need a closet hanger with a 5/ ... (cont.)

HI, I AM LOOKING AT YOUR ITEM #23-047 DOOR HANGER, 1/2" OFFSET. I SEE THE NYLON ROLLER HAS STRAIGHT EDGE. ****** I NEED THE ROLLER TO HAVE A CONVEX EDGE******* DO YOU HAVE A DOOR HANGER WITH THE SAME DIMENSIONS AS YOUR ITEM # 23-047 WITH A CONVEX NYLON ROLLER, NOT THE STRAIGHT EDGE? PLEASE ADVISE. L ... (cont.)

I need 4 of these. There is no hardware on the bottom of the door. Thanks in advance Ed

Hello, I have a sliding closet door that needs a hardware piece replaced. The item is Front roller pc - mfg # 3.041.657 The offset = 3/8" The wheel diameter = 3/4" I've been to Home Depot, Lowes and a couple of hardware stores and cannot find a replacement. Would you have one?

We have Lawrence Brothers bypass door hangers on our bedroom closet. On of the hangers broke. A trip to the local hardware store came up empty. They had a similar hanger however it has a flat-edged wheel. Ours has a rounded edge and the new one would not fit in the track.I was wondering if the 23-04 ... (cont.)

I found one of your previous posts indicating that part 23-047 would work for a replacement. Unfortunately, the 3/4 inch wheel is slightly too large. I believe the current wheel is more like 5/8 ths of an inch. Any help you can provide would be great. Thanks, Nick

I ordered 8 of part 23-047. The roller is flat not round like the old one. Can help with the proper match or remedy ? Fits to tight in track. Brad

Marking are: in a square box large L with B inside the L, us pat. 3.041.657, can.673.636(1963) Around hole with flat screw inside it says ."to lower door with arrow pointing down Both doors appear to have same size parts-1/2".

Is part number 23-047 for the front panel and 23-031 for the rear panel? My husband took the hangers off and I get to put them back on! Thank you, Nancy

I am trying to locate a part for a wooden sliding door hanger. The 3/4 inch wheel which is detachable from the hanger is broken. patent no. 3.041.657 Do you carry the part or a substitute hanger that will work on this door? Thanks. Janet R.

Hi, I have ordered the replacement Product Code: 23-047 for my sliding closet doors twice in the past. The last time I ordered these glides and installed them, the closet doors have never operated smoothly. They screech and don't glide smoothly. I have checked the glides and the tracks on all ... (cont.)