Viewing all customer Discussions for:

83-113 Screen Door Latch And Pull Assembly

Hi! The inside handle of my screen door broke off. I looked everywhere on the door and couldn't find a manufacturer. I'd much rather replace a handle than the whole door, so I hope there might be a replacement. I appreciate your help!

Do you carry a replacement? The holes on the door are 2 1/2 inches apart.

Hello I'm looking for a new mortise and lock cylinder for my Phillips 870 patio sliding door. Can someone please help me. I'm also looking for the same Phillips 870 screen door lock assembly.

Hi Swisco, we want to lock both screen door but we can´t with the latch & pull system we have installed (see pics). We ask you please if you can help us with what would be a system to lock both screen door or if we are missing any part. Thanks

Milgard logo is on glass door and screen handle. Handle is black, 3-1/2" high, 2-1/2" wide, and about 3/8" deep (each half is 3/8" deep), with a 1/2" notch on the inside where the latch lies along the metal edge of the screen door. The one I need is on a door that opens to the left from inside the ... (cont.)

I need to replace the screen door pull. There is a label on the doo that says Alumco Aluminite.

So my daughter bought this bungalow that has an ancient patio door that has been jerry-rigged; no latch, just a pull and a lame knob. The catch has been bent upwards for some reason so it all needs replaced. She can't afford a new door as of yet but her cat has learned to claw the screen to the sid ... (cont.)

Hi, I have a patio door, milgard brand from the late 1990s. The handle for the screen door broke. The mounting screws are about 2 and 1/2" apart. I'd appreciate if you could help me figure out the replacement part. Thanks.

Hi...Need about Qty 4 ra of these Milgard Suncoat Screen Handle Replacements. Circa 1999.Thank You,Ron

I only need the lock housing part but I ll just change the whole system. My mother n law measured 2.5" from screw to screw. I told her center to center. I think thus is the size. Part number: 83-006. Seems pretty close. I've attached photos to help conclude. Let me know. Thank you ... (cont.)

Do you have this screen door latch 2 1/2 w 3 3/4 L

We need to replace our Milgard patio screen door handle which has broken at the screw hole. The new handle can be with or without a latch. 3" between screws, center to center, on inside handle. 2-1/2" between screws, center to center, on outside handle. Metal latch is 3-1/4" x 1/2" x (1/4" catch) ... (cont.)

Hey guys, Looks like holes are 3 inches apart. All windows in home are Silverline. I assume the sliding door and screen are also Silverline. Handle is cracked. Got any ideas. Thanks!

Looking for replacement screen door handle. Item is 3.75 inches high and 2.5 inches wide. Screws are 3 inches apart

I need a replacement handle that fits this screen door. Ive submitted photos, and have more if necessary.Mark

Plastic part houses the latch and fit into its counter part guide on the other screen door.

HelloThe plastic lock has broken to the screen of my sliding glass door. It appears to be a PPG door.Again, it is the lock to the screen door that broke in pieces. The glass door is fine. A photo is attached. Are you able to tell if you have this part?thanks

Hello, I need a plastic handle for my sliding door. The screw holes are 3" apart. I need the hole horizontal measurement to be 3/8" or 1/4" from the edge of the plastic. See picture with measurement. Tnx.

The attached pictures are of the plastic locking handle that is currently on my sliding screen door on the back patio. The plastic handle has trouble locking and is very loose. I'm looking for a replacement for this part.

Looking for plastic screen door handle/latch (photo attached) also attached is door model information. The door was installed in 2012.