Viewing all customer Discussions for:

83-113 Screen Door Latch And Pull Assembly

Looking for a screen door handle for an American craftsmen sliding glass door unit purchased from Home Depot in 2009.

Need to replace latch on my Milgard Screen door

Hello, I need help identifying the necessary parts to replace our screen door handle. There is no information specific to the screen door handle but it looks like it has the same markings (brand) as the sliding door. The sliding door is an AAMA/NWWDA Series 5621 Door

We need to replace our Milgard patio screen door handle which has broken at the screw hole. The new handle can be with or without a latch. 3" between screws, center to center, on inside handle. 2-1/2" between screws, center to center, on outside handle. Metal latch is 3-1/4" x 1/2" x (1/4" cat ... (cont.)

I have Milgard sliding doors. The screen latches (double sided) need to be replaced. They are black with a recessed square centrally and there are two screws. Can these be ordered from you? Distance between two Philips head screws is 2.5 inches; width 2.0 inches; height 3.75 inches; 4/8 inch thick. ... (cont.)

Need handle for sliding screen door.

Good afternoon, I have a door latch that cam off of a Milgard screen door. the hadle measures 3.5" x 2.5". Please see photos attached. Best, George

No brand name on part, handle is broken need replacement part

Sgd-r20 96x82 Need replacement handles for 2 screen doors Could not locate on your web site

Attachment of the latch mech for the American screen door follows: Please indicate availability, price and installation procedure. Latch dimensions are: 3 and three quarters high, 2 and one half wide, and approx. three quarters of an inch thick.

I am from Panama, And I am distributor part for Windows to Central America and Caribbeans island from USA(Quanex IG), Spain(hardware for Windows and Doors), I have a Customer need some items to screens patio doors from Quanex.. We are looking for Accesories for the below drawing...... If you have t ... (cont.)

Hello, I am looking for screens door pulls and latch to replace the one from Milgard (16 years old screen). Would your #83-113 work well as replacement?

Hi, I am trying to identify this Milgard screen door handle. It's mounted on the frame. Piece 1: screen holes distance 3" height 3-9/16" total width 2-9/16" mounting section width 1-5/16" Piece 2: screen holes distance 2-1/2" height 3-9/16" total width 2-9/16" mounting section wi ... (cont.)

This is a picture of my sliding screen door. The two holes are where the plastic handle was located; the plastic handle broke off. I threw it away. I have purchased two replacement handles but they do not fit. I cannot find any identifying marks on my sliding screen door.There is 3 inches between th ... (cont.)

Our sliding patio doors were installed by Alcoa. The pull and latch for the screen door needs replacing. I have been unable to locate a similar pull. There are no markings on the pull. The problem has been matching the distance between the screw holes on the back of the pull and its edge. ... (cont.)

Pull is 3 1/2 inch by 2 1/2 inches. Distance between screw holes is different between inside and outside. Inside is 3 inches, outside is 2 1/2 inches. . Has MW on it Mike

Good Afternoon, I am trying to locate the attached sliding screen door lock/pull. It has one screw and clips into the side of the frame. There is a slide lock on the inside Any help would be appreciated Paul

I have an American Craftsman Silverline screen door. item number 716467813847. The latch handle is broken and I cannot find a replacement. It was installed in 2008. The screws are set 2.5" apart and there is a very narrow space in which to attach to the screen door. I've been to home depot, lo ... (cont.)

Marking is two springs that might be for MM or MW or even WW. Enclosed is a photo.