Viewing all customer Discussions for:

24-737 Andersen Sash Balance, 725, 727, 731, 737

I removed balances and brought them home (cannot measure glass). I need to get part number from balancer itself (rest of the window is 250 miles away, so I cannot measure glass). The number725 is stamped prominently next to staple hole on one balancer. The number on other balancer is unreadable. ... (cont.)

anderson windows bd16 7#27 2-87 11600-17 how many pounds pull is this

The Andersen Narrowline Perma-shield window unit size outside measurement is 33-5/8" wide x 40-5/8" high It appears sash balances are broken on this unit. How much would the two replacement sash balance units cost for the two ? How long would it take to receive these once ordered to Levittown ... (cont.)

I require six sash balances. Two each for each of three windows. The windows are Anderson and are 24 years old. The open glass area for the bottom sliding window in each case are as follows: Window one: 20.5 inches wide and 28.25 inches tall Window two: 28.25 inches wide and 28 inches tall ... (cont.)

Thanks for your help. i want to verify my part number prior to purchase. Stamped on the balance is 11600-17 and 727. From your catalog i think it is part number 24-737. overall dimensions are 6 5/8 X 3. Thanks, Bob S in Washington

I have a Anderson sash balance. I can't find any that match the number on balance is D33-7427-533 and 600-17 can u find this for me?

I am in need of 6 balances for 3 windows. The part number on the product I have is: 11600B-3. I found your company recently on the internet. The windows are 30 years old installed in an ocean front California home. The boxes are extremely rusted numbers are not readable. These are the window ... (cont.)

I am trying to figure out which counter balance to buy for my Anderson Windows. I have two codes printed. Code 1 = 11600-2. Code 2 = D60 7127 683 maybe? Can you help?? Thanks

replacement sash balance for Anderson window no. 11600-2 stamp no d21 7lb.31 4 81 these are the markings on my sash balance. window is 1980 vintage. please inform me as to what replacement will work for me. thanks you, Louis

replacement part

I need to replace 2 Anderson window counter balance sash's the number on the part is K45 7271269 do you have the part that would be a replacement for this .?

Looking to replace Andersen Window Balance labeled #11600-2. D84 7 #27 2 79. Can you help me with replacement part #? Thank you, Bryan

hi,I need to replace both sash balances Here are the pics of the printed numbers Thanks

Hi, I have a number of Andersen windows in my circa 1986 home with broken balancers. The windows all have upper and lower sashes, but are of different sizes. I exposed the balancers, sanded them with some very fine sandpaper to bring out the rediculously faint stamp, took photos, and sharpe ... (cont.)

Need a replacement balance for this.

Please see the Pictures for the Numbers, I need 4 of these balances. 7#27 Anersen Corp Bayport Minn 11600-2

Number(s) on counterbalance (11600 17) and (D75 7127 833). For a 28-7/16W X 23-15/16 (glass measurement) window. I cannot find numbers that match what I have. Are these numbers obsolete?... and if so, what is the correct replacement number?

stamped in bold D59 7#27 4 86 lightly stamped 11600-17

i need to order 1 set of botttom sash balances for each window

I have an anderson 36" window. I need to replace the sash balance. The I.D. numbers on the old sash read. D80 7#27 in one corner and 11600-17 in the other corner. Both the left and right sash balances have the same I.D. numbers on them. I need sash balances for two windows.thanks. ... (cont.)