Viewing all customer Discussions for:

24-737 Andersen Sash Balance, 725, 727, 731, 737

The 2 pictures attached show an Anderson Window Balancer I'm looking to replace. It has two cords, the one for the inner window has broken. Markings on the balancer include the Anderson Logo and the following Letters & Numbers D35 7P27376. Dimensions of the balancer are: 6-1/4"L x 2-13/16"W x 3/4" ... (cont.)

I need replacement balances for two different Andersen windows On one window both balances read K47 7 27 1269. On the other window one balance reads E3 9 27 170 and the other E3 9 27 270. Can you help?

I need to order the right & left balances for my window: Number D33 7427 635 Opposite Side 11600-3 I believe the number is: D33 7#27 635 Approx. 6 3/8" X 3" X 3/4" Deep Please let me know what replacement balances to order. Thank you, Joe

I have several 38-year old Andersen windows where the sash strings are broken. I took one window apart and the boxes are stamped with the number: D44 7P27 2X7 The boxes are 6-1/4" x 2-13/16" x 3/4" What replacement part should I order? Many thanks.

I have several Andersen counterbalances that have failed (and must be replaced)......the attached picture shows one with numbers I can't find on your website.

I have an awkward installation that will require quite a bit a carpentry work to remove the headliner portion of the window. I am hoping you will be able to identify the required part from information found on the window. Etched in the glass: NFRC 004/005 High Performance (Horizontal) ... (cont.)

Looking for replacement Anderson sash balance box. Have not yet taken unit apart but according to your Utube video, just submit glass size for determining correct unit. Visible glass on both upper and lower sash is 20" x 32 1/2". Hope that is enough info. Thanks for your input. Mark ... (cont.)

Hello, my Andersen windows were installed in approx. 1968 window and I need to replace the sash balances on 5 or 6 of them. The balance unit is nominally rectangular in shape, but does not have the 'tab' at one end (secured to frame via 2 screw holes in the body). Measurements are; 6.25" long, ... (cont.)

Looking to replace 1970 window balances from Anderson double-hung balances. The numbers on the balances are: D9 7 31 5 71

Replacement Andersen window sash balance. R19-927. Also stamped 5-88, which I assume is the manufacture date. Window has CIG-2-3-88 etched on it with "high performance".

Balance is stamped BD16 7#27 11-86 This is for the right side. No sizing info on glass. Window size 32x49h Thanks

I have two windows that need replacement counter balances (4 total) both sides of window First window is D12 7/27 587 11 60017 Second window is P82 12#27 587 11 600-17

I have the old balances out its showing two different #s 731 038 901 and 11600-17 what # do I use to order new balances

I removed balances and brought them home (cannot measure glass). I need to get part number from balancer itself (rest of the window is 250 miles away, so I cannot measure glass). The number725 is stamped prominently next to staple hole on one balancer. The number on other balancer is unreadable. ... (cont.)

anderson windows bd16 7#27 2-87 11600-17 how many pounds pull is this

The Andersen Narrowline Perma-shield window unit size outside measurement is 33-5/8" wide x 40-5/8" high It appears sash balances are broken on this unit. How much would the two replacement sash balance units cost for the two ? How long would it take to receive these once ordered to Levittown ... (cont.)

I require six sash balances. Two each for each of three windows. The windows are Anderson and are 24 years old. The open glass area for the bottom sliding window in each case are as follows: Window one: 20.5 inches wide and 28.25 inches tall Window two: 28.25 inches wide and 28 inches tall ... (cont.)

Thanks for your help. i want to verify my part number prior to purchase. Stamped on the balance is 11600-17 and 727. From your catalog i think it is part number 24-737. overall dimensions are 6 5/8 X 3. Thanks, Bob S in Washington

I have a Anderson sash balance. I can't find any that match the number on balance is D33-7427-533 and 600-17 can u find this for me?

I am in need of 6 balances for 3 windows. The part number on the product I have is: 11600B-3. I found your company recently on the internet. The windows are 30 years old installed in an ocean front California home. The boxes are extremely rusted numbers are not readable. These are the window ... (cont.)