Viewing all customer Discussions for:

23-120 Top Roller Guide

Hi Swisco!I have found most of the parts I needed, the 23-115 top pivots and the 23-120 roller wheels .... but, my bottom pivots are different than the ones I see you have pictured.I hope you have the part or its equivalent so I can redo all the closet mirrored doors in my condo ... have lots!I have ... (cont.)

Mirrored closet Bifold door installed 1989 -1990. 17-4405 is the number stamped on part.

I sent an earlier post with one picture and lost this page when trying to add the second picture. Using a different retrieval I have both pictures. Already have reference number as I sent both a few minutes ago. This may be duplicate message. If so please ignore. Sorry to be a pain but this is a new ... (cont.)

Need the bottom pin with spring. Broke while removing. About 15 years old. See photos

I am replacing some parts on two Cox bi-fold doors, their series number 26T. The white screw bottom pivot, your part number 21-092, has broken on two more doors. I replaced one other a couple years ago. I'd also like to replace the brown spring-loaded guide on the lower leading edge of the door b ... (cont.)

Please help identify this roller. Thanks.

Hi I need more part for mi mirror bifold closet

Is there a corresponding bottom roller for 23-120 top roller? I need one of each.

I just ordered a 21-092 pivot and two 23-120 top rollers. I see no reference to bottom rollers. Top rollers had been installed at the bottom but they failed. What should I order?

would like replacement parts for stanley 17-4405 here are a few pictures showing top and bottom views.

This looks like what I need to replace, but how do I remove the old one? It appears to have a plastic piece that is glued in place. Any suggestions?

Good evening. I'm hoping you can help me identify and locate something that would work for the bottom track of my Brittany Mirrored Bi-Fold closet door. I've attached a photo of the top track, and the other photo depicts the current situation with the bottom track, which is on the sub-floor betwee ... (cont.)

Please see the attached, this is from a bifold door. Please let me know if your part 23-114 is a match.

Trying to locate proper sized roller for top of bi-fold closet door. Roller diameter is approx. 11/16" or 18mm. The pin holder that inserts into the door (or anchor) measures approx 7/8" to 1/2" and is about 1+1/8" deep. Shafts are about 1/4" (narrow part) and 5/16" (wider top part) ... (cont.)

I have the bottom track on my bifold mirror door that hangs up. 1" wide 36" long. The top roller seems a little weak as well and comes out of the track.

The 23-454 and 23-456 rails? I have everything except the top roller guides and there is no top roller guide listed under related parts for those rails.

My house in the Netherlands was built 40 years ago and now I can not find spare parts for the tracks of the wood folding closet doors. On your website I found some parts which will probably do, but I am not sure. I herewith send you a picture. I need 2 top pivot brackets nr 43-051 and 2 pins ... (cont.)

Hi, wondering if you can help me? I have 2 closets with Cox mirrored bi-fold doors. One set of doors is missing the top guide wheel/roller, the other closet door is missing the lower guide wheel/roller. Do you have instructions on how to repair this and do you sell the wheels? Thank you, Gail ... (cont.)

This is for the top of a mrrored bifold closet door. The wheel part slips into the top slide bracket between two metal edges to keep it in place. The door is then set into the wheel via the pin. There is a Youtube video which shows exactly the nylon wheel part and how it is assembled. Do a googl ... (cont.)

We were hit by Superstorm Sandy's tidal surge with a foot of water throughout our house. In the frenzy of the tearout, workers removed our mirrored bi-fold closet doors in our bedroom and though the doors were set aside and saved,the bottom pivots and tracks were discarded. We have two sets, 48" w ... (cont.)