Viewing all customer Discussions for:

32-038 Drawer Track Roller, 3/4"

My house built in 1965 has some drawers that need help. Can I get replacement rollers or a replacement center assembly. Thanks Gayle

This was the only remaining track roller on a bedroom dresser I purchased recently. The dresser was made in Mexico and bought in the 70's or early 80's. Thank you!

I need a left hand drawer roller. I tried to open discussion but could not attach photo. There are no markings. Attached is photo. It has a narrow Roller and appears to be 11/16. Would appreciate any advice You could offer. Thanks. Sharon

Do you have right hand roller for the image attached by any chance? I already tried 13/16" wheel from home depot/lowes and they're too big. 3/4" sounds like a good size.

Does product number 32-038 come in a right hand roller

I believe I have found the correct part (part 32-038), but would like to verify with you. If correct I will place an order.

The drawer has bottom gliders on each side. The top glider broke. The bracket, which attaches to the back of the drawer is 2 1/2" long. It is shaped like a clamp, with the top section measuring 1/2", which is the width of the back panel of the cabinet. The wheel is elevated slightly above the cl ... (cont.)

I am interested in part 32-038, 32-040 and / or 32-041. My problem is I need a wheel that is 3/16 to 1/2" in diameter. I am only looking for 5 pair. Can you help me? Craig

the roller I have is very similar to the 32-038, I think it will work but I need left and right. my roller bracket is marked grant Dthey are off 25year old thomasvillekitchen cabinets