Viewing all customer Discussions for:

32-038 Drawer Track Roller, 3/4"

I am looking for this 80's vintage center mount roller for a monorail drawer mount. The roller is braded into the metal hardware. The draw mount hardware has a lip that fits over the back of the drawer to seat an align the roller hardware. The roller itself is about 3/16" wide as you view it from t ... (cont.)

I need to replace this part on 6 drawers

My kitchen drawers need new rollers

The drawer is broken on our Haas cabinet drawer. Do you have a replacement part for it?

its a bracket with a small wheel that rolls in one single tract under the drawer

The plastic pc, part of the oblong circle should be enclosed, it broke off... thanks

Vanity drawer has an overhead track. Need a new roller assembly. Would drawer track roller, 3/4" work for that?

I have several late 1970's-era kitchen drawers with rollers that are broken and would like to attempt to repair. From I can see on the Swisco website, the part with the product code 32-040 seems to be an almost perfect match with the part I took a picture of and sent with this email. Would this be ... (cont.)

these have a left-side and right-side status.

the support underneath is unseen the wheel itself maybe 3/4

Locking for a left hand drawer guide for cutlery drawer.

I need patio screen door rollers & I would like the width of Product Code 84-064. The thickness of my roller is 5/16" and I have a 1" wheel that is 3/16" wide. The hole spacing is 1 15/16". I think Product Code 84-064 will fit but I do not have the width of the roller body or the wheel thickness of ... (cont.)

Looking for right and left hand replacements

This attaches to back of drawer and rolls along a middle drawer slide

I need to replace 6 drawer track rollers. The cabinets are about 50 years old and the size of the roller is about 11/16?, not 13/16?.Thank you for your assistance,Judy

this is fpom a long bell brand luxuria kitchen drawers...the part is what guides the drawer from underneath no runners on side just 2 plastic rollers to keep the drawers even

Can't find these.... do you have these?

Need set both right and left

Do you have this in stock

Looking at Part 32-038, do you have one of these with 3/4" rollers in left hand?