Viewing all customer Discussions for:

23-138 4 Wheel Pocket Door Roller

I am trying to figure out the correct rollers to fit into this existing trackPlease see the images provided it is a low-profile track and will most likely be either of these parts you have. the inside track is approx. 7/8"https://www.swisco.com/four-wheel-wardrobe-roller-and-bracket/pd/Pocket-Closet ... (cont.)

I have a right and left bi-fold doors need new hardware I have the top rail but need replacement parts any idea who made these the originals are about 28 years old

I am looking for replacement rollers for two pocket doors. The product i'm looking for is similar to product code 23-138, however, the dimensions of my rollers are slightly larger than product code 23-138. Wheels are 1 1/4" in diameter. Do you have any larger versions.

does the star piece of the unit allow the door to be adjusted after it is installed?

I am in need of the parts in this picture. Can you please review and let me know if this is something you can provide? Thank you.

hello. I have pocket door roller that i have to replace. on the roller it states 1300 Kennatrack. I am looking for the sprocket, spring, and bolt for this assembly. i looks pretty close to 23-138. I have attached some pictures for you to reference. Thank you

This pocket door hardware is from 1989. Somehow one of the metal brackets, that mounts to the top of the door, and then to the roller, got lost. The track and rollers have been in the wall for the past 30 years, and we are finally going to hang the pocket doors. We'ld really like to find one of thes ... (cont.)

Trying to find pocket door rollers for an old door kit picked up about 15 years ago a better

Hello, Can you help me with a replacement roller for this bifold door?

Wheel od 3/4 . outside of wheel 7/8 side to side.

Looking for roller assembly and bracket holding the roller assembly. # on rollers is "Kennatrack 1300" Thank you, Dale & Ellen R.

How do I separate the steeel door bracket from the plastic star wheeled adjuster? Peter

Do you recognize this piece of hardware? My son recently purchased a condo and one of the closet doors has a piece of hardware missing. We are hoping to obtain another to fix his door.

Hi! My pocket doors squeak something fierce and I'd like to lube them but I'm not sure what to use. The doors appear to hang from a set of 23-138 rollers. Should I use grease? Oil? Silicone? Graphite? Thanks, Derek

The wheels are 3/4" Space between center of the wheels is 3/4" and left to right is 1" (wide of the track). Thanks!

We need to replace only the metal bracket with these exact dimensions (23-138) for a different roller system. Is this all one piece or can the roller "post" be taken out of the metal bracket?

the part i am trying to replace has 3/4 inch wheels. And the 7/8 inch spacing on the wheels ... is that center of wheel to center of wheel or outside to outside etc (pn 23-138)?