Viewing all customer Discussions for:

81-229 Sliding Glass Door Roller, Look

Hello,I want to order new nylon wheels and rivets for these rollers. Can you tell me what size I need? I need 12 wheels and matching rivets. Unless you happen to have the whole roller assembly which is 40 yes old. Thanks George

Need to find out if these are available within 60 miles of Warren Arkansas If not, then need to know where to order online Thanks in advance

I am looking for two of these.

No name or markings found on door or rollers. Part coded 81-229 looks like what I have. Are you able to confirm or make a recommendation? Let me know if I could try to give you more info. Thanks Mark

Hello! This post is for my mother in law. She took her sliding glass door apart and is having a hard time finding any brandage or model or part numbers. The wheel diameter is 1.125" The housing height is 1.125" The housing length is 2.125" The housing width is 9/16" without dimples, and 12/16" wit ... (cont.)

Roller is one inch high by two inches long by 1/2 inch width. Concave roller. Roller has "Killian" stamped to it. What is my best replacement part? Thanks!Kevin

If you could help me identify this part. A single roller for 8ft tall and 5ft wide mirrored wardrobe doors. I would need a total of 8 new rollers. Roller measures as pictures show 2 7/16 inches long--9/16 wide---1 1/2 overall height, roller is 1 1/4 and it is neoprene not metal.

The roller is not moving freely. Need to replace 4 total but unsure of part number.

The only markings on the door is a sticker from Milco Building Products out of GA. This door is in a manufactured home built in 1995

Hi,I am in desperate need of these two rollers. Is there a difference in front and back? Please let me know as soon as possible. Thank you, Debbie

I ordered this thru your site part number 81-229 but I think there too big so before I open them please tell me I am sending the ones that are on the door now to you

Hi Please see the attached picture with the measures, the high is about 1-1/8. Thank you so much!

Hi, I am trying to replace these rollers. Your part number MIRROR DOOR ROLLER, 1-1/4" DIA. Product Code: 23-043 seems to be the best choice since the roller diameter and width is the same, as well as the casing thickness and tab offset/height. The casing is a bit different in design but very close ... (cont.)

Hi Staff, I don't see any names or marking on the roller. Attached is the picture and measurement. Thanks in advance, Jason

Hi, Looking for rollers for my sliding glass doors. can't exactly see all the numbers but the manufacturer is AFG C2652. Can you help me? Rebecca

Do you carry 81-229 whit a 1" wheel concave

This roller has a 1-1/8" OD concave steel wheel. Width of housing 1s 1-9/32". Length of fixed housing is 1-5/8". Height of housing is 1-1/16"

Sir: I am replacing this part to my existing sliding patio door (81-229). They look exactly the same. My home was built in 1981. Home Depot, Lowes and Ace, do not carry older parts. I did look on the frames of the doors for the manufacturer, but with no luck. Please get back to me on shipping info ... (cont.)