Viewing all customer Discussions for:

23-193 4 Wheel Wardrobe Roller & Bracket

I'm looking for the above roller for the bathroom door

I hope these pictures are helpful, and I have been told that the manufacturer may have been Ducasse, but the truck slider on our 12 year old sliding door finally broke. I haven't had any luck tracking this part down on my home, and so my new friend at Home Depot suggested reaching out to see if you ... (cont.)

I need 4 of these plz

What is the weight capacity of these rollers? Will this support a door of 100 pounds?

I am looking for a triple wheel (convex) or rounded wheel hanger, whereas the wheels are not flat on the track, but rounded more like a child's scooter wheel. As you can see the hanger has an adjustable wheel just above the bracket. The screw for this hanger is stripped and not holding the door. ... (cont.)

Which track would the 4 Wheel Wardrobe Roller & Bracket Product Code: 23-193 run on?

Doors from probably the 70's. Would like to get more of the same so the rollers work in existing track, or different rollers that will work in the existing track

I am trying to figure out the correct rollers to fit into this existing trackPlease see the images provided it is a low-profile track and will most likely be either of these parts you have. the inside track is approx. 7/8"https://www.swisco.com/four-wheel-wardrobe-roller-and-bracket/pd/Pocket-Closet ... (cont.)

I have a right and left bi-fold doors need new hardware I have the top rail but need replacement parts any idea who made these the originals are about 28 years old

I am looking for replacement rollers for two pocket doors. The product i'm looking for is similar to product code 23-138, however, the dimensions of my rollers are slightly larger than product code 23-138. Wheels are 1 1/4" in diameter. Do you have any larger versions.

Pocket door from 1990s. Need replacement rollers as seen in picture

Do you offer a suitable replacement for this?

Please help Center wheels. 2 1/2" long 1 1/8" wide Wheels 7/8"

Need one. Brand name is Stanley. For interior sliding door in laundry room.

I removed the existing door by lowering it enough to push it off of the black threaded hanger bolts shown. I disposed of the door with the receiving brackets still mounted to the top of door. I am in need of a similar top of door bracket to prevent having to dig into this any further. ... (cont.)

Hello, I had to remove a closet sliding door. One of the locking latches that holds the door in place with the sliding pin in the track broke off. Now the door will not stay in place and falls off the holding pin. I am trying to locate a replacement latch. Our home was built in 1997. Any help would ... (cont.)

Looking to purchase 4 each trolley assemblies with ball bearing wheels if possible Length of metal base 1-1/2" Overall Lengt 1-3/4" Width between wheels 1" OC Wheel Height 7/8" approx.

Hello. Remodeling and some parts for a sliding door have been lost. Attached pics of the rail, the sliding roller w/ hanger bolts, and the bracket that connects the door to the sliding roller/hanger bolts. There are 2 doors and from the pics, you should be able to see the complete door. I'm miss ... (cont.)

Please help me find this part

Please help order this part