Viewing all customer Discussions for:

81-243 Patio Roller Assembly, 1-1/4" Wheel

Older door, hard to find.

Needing to replace the rollers on our door. Pennco door PC079-2

8' X 3' Mirrored Closet Doors 30-36 years old Pictures worth a 1000woords

Part 81-243 looks almost identical except it is taller (1 7/16 as opposed to 1/3/16. The space where the roller inserts is 1 3/16 so the taller roller will not fit. Door is about 44 years old.

Hi, Can find this item in ur catalogue. Roller size if 1.1/4 inches. top width 1.7/8 inches bottom width 2.1/16 inchesA similar roller I have found on ur website https://www.swisco.com/Adjustable-PGD-Roller/pd/Patio-Glass-Door-Single-Wheel-Rollers/81-243 Can anyone answer

Can you tell what part number these are?

I have a cabin, circa 1976ish. My patio slider doors need roller assembly replacements. They are a single roller assembly. The stamp on the roller is. Product of Del Mar Eng Co Long Beach Cal Pat 3 670 357 (as best as I can tell) The roller has a hook tab above the adjustment screw. The ... (cont.)

Is this your 81-093 or 81-083?

Hello, I have several patio doors requiring roller replacement. The doors date from about 1977 and all use Del Mar single rollers. The rollers do not have model or part number markings on them, but are identified as "Product of Del Mar Eng. Co, Long Beach, Cal. Pat 3,670,257." I have looked at the D ... (cont.)

I need to get 2 replacement rollers matching the attached pictures. It is 1 7/16" tall x 2 1/4" long and 3/4" wide at the little bumps on the side of the unit. The roller is 1 1/4" outside diameter. On the side it says "Product of Del Mar Eng. Co Long Beach CAL". I don't see any model number. ... (cont.)

I an shopping for new rollers for my patio door. I have my rollers out, and the one I have is very close to your 81-255.The basic design is exactly the same except mine has a 5/16" 1-1/4" roller, and the tab on mine has a bolt hole where the 81-255 has a slotted tab All the assembly measurements are ... (cont.)

HELP! I am trying to replace the roller's in a sliding glass door in my home, the house was built in 1984 in south Florida and it is a 8ft wide, 74" tall door with a metal frame. The pictures attached are the roller that I was able to pull from the bottom of the door. Here are the measurement ... (cont.)

Hello Can you please tell me the dimple width on you part number 81-243? The part I am replacing appears to have a dimple width of 13/16". Thank you Casey