Viewing all customer Discussions for:

81-244 Sliding Glass Door Roller, Pella

These rollers come off of a 2004-2005 Proline 7282 XO sliding door and a 2004-5 9681 XO Architect sliding glass door. Dimensions are on the photos, 2-3/4" x 1-7/8" x 5/8". I need 4 in the highest quality you've got.

I need the part number of replacement rollers. 1 1/2" wheel. 2 5/8: long. 1 7/8" high

I am looking for 2 replacements for our Pella sliding glass door rollers. They look like the Product Code: 81-244 on your web site but I don't see any markings on the door or rollers. Thanks!

35 year old Pella sliding glass door replacement rollers.

I'm looking to replace the two roller assemblies on my patio door. From other posts I've seen on your site, I think I know what I need, but want to be sure. Hopefully these photos show what you need to identify my part. It is a metal wheel. I did not get diameter when I had part out, but shou ... (cont.)

PS11 6L oper Pella slider door I need to replace 25 year old rollers . Very hard to open and close after using grafite with no success

I Have (2) 18 year old 16' wide sliders we can barely open. This is the slider window sticker info. CYG TEMPERED 16 CFR 1201 11 Not positive of this 8GCC 1806 8732 0 --Hard to read beginning. Both doors hardware shot

NEED REPLACEMENT ROLLERS FOR A PELLA SLIDER ( 7281) APPROX 20 YEARS OLD. TOOK UNIT OUT AND PICTURES ATTACHED TO THIS EMAIL. FROM YOUR WEBSITE I THINK IT WOULD BE 81-244 BUT NEED CONFIRMATION THANK YOU

Hello, I'd like to find out the replacement part number for the roller assembly on my Pella sliding patio door. The dimensions are as follows: 2 3/4 length x 5/8 width x 1 7/8 deep. Wheel diameter is 1 1/2" and 3/8" thick. It is made of steel. Thanks so much!

Below are the Numbers I found on the door. ELLA -PEL- 1003 - ASCS FVF122- 071E080CWHT - 5263 -NFRC I hope this helps

I am trying to get rollers for a Pella sliding glass door. Pella's part number is 0FAT0000 (vintage ~ 1990). Is your part number 81-244 the same as the Pella part number?

Attached photos are for A Pella Designer Series Model 11781 4 Panel Sliding French Door. Originally installed in May 12 2001. Trying to identify correct replacement wheel assembly

this door is about 24 years old, its a wood and aluminum clad door. the tag on the door is in the pictures along with measurements of the part.

Hi Can you id this part? Also, how do I get it out? Thanks!

There is no model number listed on the side above the handle, nor on the glass inside. I need to model number to get and price the wheel assembly.THank you,Marley

Our Pella slider seems to need new door rollers. The slider is likely 20-21 years old. We had someone look at the door which he removed and determined the wheel bearing was bad. Unfortunately I did not take a photo of the wheel while the door was off. I have attached a photo of the door in hopes tha ... (cont.)

Can you identify replacement rollers for my older Pella sliding glass door using the numbers above? If not I will have to find a handyman to help get photos of the old rollers. Thank you.

Hello, I have a six foot 1985 pella exterior sliding door. I need to replace the rollers and don't want to remove the door to see what style they are. I'm hoping you'll know and can send the right replacement parts. Thanks.

These are from a circa 2005 wood frame 5' Pella sliding patio door. I would also like to replace the track - any idea what and where I would get that? Let me know which of the rollers you sell will replace mine. Thanks, Wendy

Trying to identify the model of a Pellla sliding door so I can order replacement sliders. The serial number rubbed off. Any ideas?