Viewing all customer Discussions for:

39-355 Awning Crank Operator Slot Cover

This is a strip that is on a set of old crank windows. it pops in and covers a hole to the sides of the the windows

Hi, I am trying to locate a missing piece on my window. Here is a picture with the missing piece on the left side of the window. I am not sure if it is another crank arm or a latch. Any help would be appreciated. Thank you

These are old ( circa1986) windows from my mom's sunroom. The plastic plug as you can see from the pictures has deteriorated and I would like to replace... is that something you have? Thanks for your help.

I'm looking for the exact left and right face plates for opposite the crank operators.

Looking to replace this part.

We moved into a new house recently. On the sunporch there are windows that have a rectangular stop/plug, but several of them are missing. I measured one of these and they are approximately 3/4" X 5 3/4". Hoping you have these. Thanks for any assistance you can provide.Regards,Mark ... (cont.)

I ordered the slot hole covers but seem to big for my slots which are oval. Do you have different ones? I also need a left hand crank operator like the one in the photo. Thanks

Hello. Please help me ID the window operator and cover plate for my windows, images attached. Arm extension measures 2 3/8". Also, operator mounting hole needs to be to the right at the top, not centered. Thank you.

Hello, just bought a home with these old windows on the back porch. I'm determined to restore them. Mainly I'm searching for the blanks that fill the open space in sash opposite from the crank. Quantity 14 at least. Also need one replacement crank.

HelloI am looking for a window clip and screw part along with a crank handle for the window - this os a "sun room " from the 70's . I semt pictured above . Thank youVivian

Right hand operator with one do you suggest

Want to cover this hole in my jalousie window. The hole is on the left. The window crank is on the right . What is this part called and how do I get more?

It's an Alcon part that covers where the window crank would go.

I am looking for assistance with purchasing 10 face plate cover for the inside window frame of an awning window. There are two places on each window for a crank. One is where the crank goes as preferred, on the left of the window or on the right. The other is where a blank face plate is located so t ... (cont.)

Have old windows with old Jalousie windows and parts. Simply looking for additional what I call "Screw hole cover plates". Do you sell these? I need 5 inch plates. I cannot seem to locate in our hardware stores, or on line. Thanks!

Looking at the window the crank is on the right side. The cover i need covers the hole where the crank would be if needed . The pic I sent you covers the vacant weep hole or where a crank would go into if needed. The cover size is 5-5/8" x 3/4" wide. The windows are around 35 years old and the pla ... (cont.)

Hello, Do you have that metal, corner piece? This is a 1960s aluminum awning window, typical Florida type. The one on the left fell off and my dog destroyed it. I had to tape over the holes.

We recently had window shades installed and the window crank obstructed the use. We took the cranks off and need three covers to hide the holes where the existing cranks were. Please see photos of where the panel needs to go, a existing panel on the opposite side of the window and a pic of a pane ... (cont.)

Good Afternoon,I am wondering if you can help me identify this piece that broke on my crank window during our kitchen renovation and if you have one in stock. I have attached pictures.Rich

? Do you know the name of this part? Looks like plastic, do you sale them.Thank youCecilia