Viewing all customer Discussions for:

81-247 Traco Sliding Patio Roller, Concave

I ordered these from you and installed the ones you sent but I do not feel they will be functional as the grove on the ones you sent are very shallow and the groves on the ones I need are very deep to ride on a ridge ? the size is correct on the ones you sent but the grove on the roller is too sha ... (cont.)

Do you have the part in the photo below? Wheel is 7/8" and 1/4" wide. From wheel to end if assembly measures 1 1/2".

Hello, I am trying to replace the rollers for my Traco Commercial quality Aluminum Double panel sliding balcony door. I believe that the door model is Traco TR-8300 but I need to confirm since there is no sticker on the frame. The door is approximately 15 years old. The frame depth is 5 5/8" with sc ... (cont.)

2000 Fleetwood Bounder RV - 1 inch diameter roller; bracket width 1/2 inch; need roller replacement as wheels have broken.

The roller is exactly 2" x 1" x 1/2". It fits in a slot in a wood screen door. I would prefer a roller with a nylon wheel but will take steel if that's all that will fit. Note the adjusting screw to raise and lower wheel. Any assistance you can give me would be very much appreciated. I would al ... (cont.)

To whom it may concern, I am trying to replace either the wheel and bearing assembly or the entire piece. So far, I have not been able to find anything close. Local repair folks cannot either. Ideas? Jim

I am looking for four patio door rollers for my wood frame, screen door. (It only uses two, but if I can find replacements, I'll get some spares!) Here are the parameters: My space into which they go is 5/8" wide, 1 1/8" deep, and 2" Long. The current rollers have a 7/8" concave wheel. The ... (cont.)

I would like to know if you guys have anything close to this part attached below. I have a customer with an RV that needs 2 of these if at all possible. My name is Tory

I have been having trouble finding a wheel assembly from a custom patio screen door. I previously bought the "84-095 Moss Patio Door Roller" but it's too narrow (it shall be 1/2" or 9/16" wide) and doesn't fit well and operates the same. Please let me know if you can find the right part for me. ... (cont.)

I have a roller that is exactly the size of your 81-248. EXCEPT I need the grooved roller wheel not the flat wheel. I have spend hours and hours looking and your part 81-248 is exact same dimensions and the only company on the planet that shows the exact same part I have. Any help with finding this ... (cont.)

I reciently purchased a set of mirror door rollers from you (#23-198) and they are way to large for my application. I was hoping to get some help finding gthe right part. The roller assembly I need goes on the bottom fo my wardrob mirror door in my 2000 Fleetwood Discovery motorhome. It's very simyl ... (cont.)

can you please list the measurement for the roller from the front of the metal (not including the wheel) to the back of the roller metal without the screw or mounting flange? A complete measurement of the roller would be helpful. thanks