Viewing all customer Discussions for:

81-250 Sliding Patio Roller Assembly, Capitol/Remington

No part numbers visible

Need to find replacements for this part. The one pictured is still in good shape, but others have corroded such that the tab that holds the screw for fastening to the bottom of the sliding panels has broken off. No names, numbers or markings visible on this part. See side view with ruler pictured ... (cont.)

1 1/4 steel wheel. It's held in by the channel itself in a slot.

Looking for a part number, and two order six of these

Please identify and sell us the correct sliding door roller assembly. Width - 17mm height - 40mm depth - 70mm wheel (plastic, but a metal one would be great) dimension - 36mm Thanks!

The rollers are installed into the styles

please help identify

Is the above photo enough for you to identify the correct assembly to order? It's the only photo my maintenace guy sent. This is in a building built in 1990 in case that helps.

Hi I'm locking for roller closet door part # 136089 the wheel 7/8 "and the thickness 1/2"

Looking for replacement part for ansi mgr code cv-1 series 600 ANSI/aama. Hs-r20, hs-c40 mst 12060/806, 101-88 Providing you with info on window sticker Home has 39 of this type of window. Many of the window wheels needs to be replaced.

good afternoon. can you help me with these? if you need dimensions let me know. thanks

Door is double-paned aluminum circa 1986, in good condition except for flat spots that developed in a couple places on steel rollers. Roller assembly screws into the bottom of the door in one place and this appears to be the only thing that holds the rollers in place on this model. Thanks for any he ... (cont.)

5/8" wide 2 1/16" long 1 3/16" tall 1 1/8" wheel Stamped Del Mar Eng. Long Beach, Ca. Haven't been able to find one with a mounting tab.

Please identify the correct rollers I need to replace these. Width 5/8" height 1-1/8" wheel diameter 1-1/4" all metal wheels and frame.

These (photos attached) are the rollers I hope to replace. The flanges are .665" wide. 23-232S are too wide. Can you help me identify the correct rollers, please?

Do you have the Nylon for the 81-250 product?

Please note the angle of the mounting screw, indicated by arrow in ..389 of the pix. This seems critical and has proven hard to find.

I need to replace the attached rollers. I saw your roller part # 81-077 which have the same measurements but my rollers do not have the dimples that part 81-077 has. Do you have that same roller without the dimples.

I went to Home Depot and Ace and they don't have the same roller with the amount of adjustments that has a metal wheel most of the rollers replacements that I could find were for sliding glass doors for exterior application this is an interior mirrored glass door with a metal frame ... (cont.)

Screen door was probably installed in the early seventies. The parts in question are the roller levelers on each corner of the door. The part is attached to the door by a vertical tab with a hole through which the screw that holds the corners of the door together passes. Below that screw is another ... (cont.)