Viewing all customer Discussions for:

81-250 Sliding Patio Roller Assembly, Capitol/Remington

Can't find any names or series numbers on the part.

I do not have part number, only the model: SAL S HD

This is from our 56 year old sliding glass door.

two heavy sliding doors with mirrors used for closet failed to slide on track. removed doors and then roller assemblies. cleaned with metal brushes, WD40 and lubricating oils to unstick ball bearings. successful with 3 out of 4 and restoring ability of rollers to spin freely. reinstalled two assemb ... (cont.)

Hi I need help identifying this roller wheel for my glass sliding door.

I need 8 of these rollers. Installed in original doors from 1979 1 1/4" Diameter wheel

Late 80s dual pane patio sliding door, looking for replacement rollers

Can you help me replace the roller assembly. I unscrewed the screws and Having a hard time removing it. Need two replacement rollers.

my current roller has the same measurements as 23-092, with a nylon wheel. My measure, wheel diameter 1/8, 3/4 flare, with 9/16 inches.The 23-043 diameter is 1/8 longer than my roller. Should I buy 23-092 or 23-043?For tha matching track 23-271.My door frame opening is 59.5 inch. Will 0.5 shorter th ... (cont.)

I have an old aluminum glass doors the other wheel broke in half and I need to replace them. I tried local only to end up with items that won't fitShay

The site would not let me upload photos today. I need to replace four rollers that 23-232S was slightly too big to fit inside the channel where the previous roller was. I need a slightly smaller version and I need to return the previous order. E mail me so that I can attach the photos of the old ... (cont.)

My last picture shows a close match. The wheel dimension is what concerns me. The wheels I have measure 1/16 bigger than the ones on your catalog. Which I would actually like the wheel to be 1 1/4 O.D. Hope this is more help, hope to hear from you soon.

The roller is locked. The whole roller unit is made of metal - gold colored. The roller itself is about 1 and 1/8" in diameter. The door has two rollers at the bottom. One on the left and one on the right. Each roller fits into a bottom track.

Hi, I believe the replacement part I'm looking for is most likely your 81-250, but I want to confirm before ordering them. The images don't have a plastic roller part around the bearings since this is the part that broke off. When measuring another roller, I think the diameter was closer to 3.25 ... (cont.)

Need a roller that has the same specs as part no 81-250, but with a 1 1/2 inch steel concave wheel.

I have a rental house built in 1962. It has a sliding door with rollers that say "kilian" Syracuse, NY and Toronto, Can.. I need either the roller or the assembly for both sides. Thank you, Troy