Viewing all customer Discussions for:

23-500 2 Door Sliding Closet Door Track Kit, 4ft

Sliding doors maybe from 60-70s?.?. Roller came off, I've bought several different ones over last few weeks, nothing fits. The roller looks to be ½ x ½ though can be sure without removing 1. Thanks for any help.

I ordered the 23-087 on order number 1734353. See my picture, attached. The roller looks like my original (the black wheeled roller, loose). Your roller wheels are now white (attached to the door in photo). However my real issue is my rollers are 3/4", but on the 23-087, they're 7/8, and they do ... (cont.)

Roller is 3/4" diameter with offset of 7/8" inch when measured from the inside of the offset; 1" when measured from outside of the offset. I've tried to upload Need replacement ASAP as I'm trying to sell my house. Will pay for expedited delivery/service. Tried to upload photos but kept "Connecti ... (cont.)

These were mounted to the top of the sliding doors so don't know what offset is need for the ones that mount to the sides of the doors? Thank you!

Can you please advise what roller replacement is needed. This is the front door. Thanks!

The roller wheels ar 3/4 inch, screws are 1 5/8 inches apart. The adjustment no longer works. They have been hanging for about 22 years. #452 is engraved along with 3/4 rear, 1-3/8 front. Thank you for any help you are able to provide. John

photo attached .. need glides .. tks ...m

Do you sell this product?

This is from a set of doors that are hung. We have two other sets that need these exact parts. So I need 4 brackets total. I included a photo of the track which shows the slots for the wheels which are three-quarter inch size. The doors are 1 1/2 inches wide.

We are trying to repair our closet door. Do you have this part?Thank youPam

1" roller for inside door, the offset looks to be in the 1" to 1 1/8" rangeDo you have anything like this?

As the picture describes by its markings it has a 3/4" offset. Will need a pair Also has a marking of 1 3/8. Please advice. Thank you. Ken.

I need to rehang closet doors that were removed quite awhile ago. Two rollers are intact, but the other two are missing. These are luann doors about 1-3/8" thick. The nylon rollers are 3/4" in diameter. Offset of the one pair I have in hand is 7/8" inside measurement, 1" outside to include the width ... (cont.)

I'm looking for this type of door roller that I need to replace.

Do you have this item or anything similar with a 1/2" or 3/8" roller?

Old roller is Leigh brand 3/4 inch wheels. Getting hard to find, no luck at Lowes or two local hardware stores. Found these Swisco replacements on a Google search. One of my solutions beside replacing rollers was to relocate them closer to door edge. If these don't hold up my next repair will be to ... (cont.)

Hello,We purchased your product DOOR HANGER, 1/2" OFFSETProduct Code: 23-047This comes with 3/4" roller diameter.I need 1/2" offset with 1/2" roller diameter.Can you help? I did not see this product in site.Andy B

I googled the U.S. Pat. 3.041.657, which has No. 454 above the 3/4 front and 1 3/8 rear with a rounded/convex edge wheel and was directed to Swisco part #23-031, which has No. SBI above the 3/4 front and 1 3/8 rear with a squared off edge wheel.The conversion of U.S. Pat. 3.041.657 did not work beca ... (cont.)

The roller for my closet door broke and lost the wheel. I ordered a replacement but the wheel wouldn't fit in the track, what is the right part to replace this one with?

I am trying to hang two 2' wide sliding closet doors which are 1-5/8" thick. I am having a terrible time trying to find hardware anywhere for the closet doors. The roller is 1" diameter. I've attached pictures. Is there any guidance you can give me as to where I could find something like this ... (cont.)