Viewing all customer Discussions for:

58-171 .270 T-Slot Foam Filled Bulb Weatherseal,12ft

Can you please recommend a replacement for this weatherstrip? I already place an order for other items. Could not ID a replacement for this bubble seal. My order number is 1166737

Bad picture - t is very small

I need weatherstripping, can you identify this part? It came off United Windows.

I can send you a small piece I need to replace on 8 windows

I think the windows are by Jen Weld but not sure, not original home owner

the "T" dimension is approximately 17/64th" across the top of the "T". The bulb is heavily compressed but appears to be approximately 20/64" in diameter

Please help me identify and replace this vinyl window bottom sash seal. Below is a picture with dimensions of the seal that is attached to my lower single-hung vynl window sash. I would like to identify a suitable replacement seal and would be ordering enough for all seventeen windows in my home. ... (cont.)

img-3834 is for single hung window bottom seal img-3835 is for the sliding vinyl door

If you have the T-seal great if not could you tell me the size of the seal

I'm looking for replacement weather guards for Accu-Weld double-hung 24" vinyl windows. This part is a single assembly consisting of a T-shaped plastic runner that slides into a groove on the window and has a rubber gasket attached. They're for the bottom windows only. Mine are deteriorating and won ... (cont.)

Trying to determine the correct weather stripping. Bulb diameter is 3/8 of an inch. Base Ext length is 1/2 an inch. We think it might be 58-182 or 58-171. What is your thought? Thanks

Good Morning, Alside Windows apparently does not honor their "Lifetime Warranty", claiming it is a "Limited Lifetime Warranty" Anyhow, I am trying to replace the damaged weatherstripping on all 10 of my windows. I see you have .270 (58-171) and .187 (58-182) bubble seal available. I just want to mak ... (cont.)

I'm looking to replace this

Need replacement weatherstripping. Need 6 43 inch pieces and 6 19 inch pieces The "I" beam is hard plastic.

I don't have a model number but the windows were installed in 2003. All of the windows have this piece hanging. It is the top window, outside. Can you identify the part so I can order replacement.Thank you

I attached a label from a 1000' roll of weatherstripping we purchased back in 2012, but I'm not sure where who we bought it from. We need more of the weatherstripping in the attached picture. Do you recognize it or the label, and know where we can get more of it?

Foam 5/16? ?Leg? 5/16? Fins 1/4 hard plastic

Please let me know which is the part number I need. Thank you.

The insulation strip on the outer bottom of the capital windows needs to be replaced and have been trying to locate the part. My windows were install 2000-2001 timeframe. Any help would be appreciated.

Overall Measurement is Approximately 1" The Solid bulb is approx. 3/8" Diameter The bottom of the the vinyl "I" beam is 1/2" The top of the vinyl "I" beam is 1/4" Total height of the "I" beam is 1/8" The distance between the top and bottom "I" beam is 1/16" The thickness of the "I" beam is approx. 1 ... (cont.)