Viewing all customer Discussions for:

23-502 2 Door Bypass Closet Door Hardware Set, 6ft

Hi I'm looking to replace the hangers on sliding closet doors in a bedroom. Our house was built in the 1950's so these are the original doors that are quite heavy. Trying not to replace the doors if possible. The dimensions on the hangers are 1/2" wheel and 1" offset. If I cannot find these, is ... (cont.)

It's a 1 inch offset with a 7/8 nylon wheel.

I need a new hanging system for my 70-year old bypass doors. The double-J channel is only 1-1/2" wide. The doors are 1-3/8" thick.

I need a replacement for a top roller on bifold door. The top diameter of the roller is 5/8" the bottom is 3/8". The door is 1 1/8" thick The bracket is marked HAR VEY

Looking for rear hanger replacement roller for bypass closet doors.

I have a fifth wheel RV, with sliding mirror closet doors. The frame is wood (or some material that looks like wood :) ). Door opening is 86" and each door is 44". The hardware is extremely cheap and flimsy. I've included photos. I would like to replace the the hardware (or at least the bottom hardw ... (cont.)

HI Swisco!I received an order a set of front and rear closet door roller hangers.I need the same offsets for both front and rear but need the smaller roller wheel (2mm) as these are for older doors and track.Picture attached.Can you help and thank yo in advance!John

Us Pat 3041657

I am trying to find a replacement for this Stanley closet door wheel/roller.

Looking for these closet rollers . 1962 home . Have original closet doors , need rollers . Thank you

When I measured the hardware the roller assembly seems to have a 7/8 in diameter concave wheel and one seems to be between a fourth and a half inch offset and the other one appears to be 1/8 inch offset. I took a picture of the track and as you can tell it's had many years of paint slapped on it. Th ... (cont.)

Looking for replacement rollers for a bi-pass sliding closet door.

Hello Swisco, I know Lawrence Brothers is out of business. I believe another manufacturer made a replacement for some of their closet door rollers. Attached is a picture of the ones my customer is looking for. Do you have something that will work in its place. 3/4 rollers, 1 1/8 from inside plate ... (cont.)

The order that was sent was not the right ones. It has a 3/4 roller and 7/8s. This is the 3rd time sending pictures. Please let me know if you can help. See the 4 photos sent above. Any questions please callThomas

Please let me know if you have any thing that would work. I am doing both doors so will be needing full set.

We bought a house that has wood sliding doors in bedroom, bathroom and hallway. Not one door is working properly and I want to try to keep the doors. The doors are 1 5/16" thick so the standard track at the home improvement stores are not wide enough for the doors. I'm looking to replace the ro ... (cont.)

Looking for parts or replacement. The roller is 1 inch diameter

The bracket for sliding door is1inch high and 1 3/8inch wide. The roller brackets are 1 1/2 inch wide, 1 1/4 inch high. Wheels are 7/16 -1/2 diameter offsets of wheels are 1/16 and 3/8. Looking for these parts.

Hopefully you have this or a newer version that will work

I'm looking for hardware for bypass closet door replacements. I can't find any number or brand on the existing hardware. The home is from 1956, so the doors could be this old. I need two sets for each of two rear doors. I'd appreciate your help.