Viewing all customer Discussions for:

23-502 2 Door Bypass Closet Door Hardware Set, 6ft

The bracket for sliding door is1inch high and 1 3/8inch wide. The roller brackets are 1 1/2 inch wide, 1 1/4 inch high. Wheels are 7/16 -1/2 diameter offsets of wheels are 1/16 and 3/8. Looking for these parts.

Hopefully you have this or a newer version that will work

I'm looking for hardware for bypass closet door replacements. I can't find any number or brand on the existing hardware. The home is from 1956, so the doors could be this old. I need two sets for each of two rear doors. I'd appreciate your help.

I'm looking for the Leigh 1 3/8 rollers for my closet doors

Hello. Can you please tell me what type I need? I need 16. Thanks!

Hi ,I am looking to replace a Stanley Dial closet Roller. I recently tried one from National Hardware (V-795) but it didn't work . The wheel is to close to the track.The ones I am trying to replace have a .125 shoulder. Wheel diameter is.84 .Offset is 7/16. I have attached photos. Both doors had th ... (cont.)

Looking to replace this grant rocket carrier, in the one attached the wheel broke off. If I am unable to find this part, can i replace all the carriers and not the track with something similar?

Hi, I need a few 1960's Stanley Rollers with these dimensions: Outside wheel dimension: 3/4" Inset of Roller over door: 1/4" thanks, Vinit

Knape-Vogt No.867 Closet door roller

I believe these were made in the 60's. There are 2 almost exactly on your website, but I thunk the depth is deeper. The wheel broke off it.

Pictured is the one roller I found on door. Need two, other is missing. Nylon roller is 7/8". This example has roller tilted, but I think a straight roller or a roller offset some to rear would work. Forward offset, as available retail, results in interference with rear door. Part is marked TENNATR ... (cont.)

Sir/Madam I need replacement rollers like the ones attached to this email ? they are old and I had to cut the screws to get the old door down.. they are from the Sixties? Har-Vey was manufacturer?. Please help!

looking for replacement 1959 home. closet bypass doors. I believe these are 3/8 offset 7/8" rollers. all the ones I found locally do not work. drags on bottom

Sliding doors maybe from 60-70s?.?. Roller came off, I've bought several different ones over last few weeks, nothing fits. The roller looks to be ½ x ½ though can be sure without removing 1. Thanks for any help.

I ordered the 23-087 on order number 1734353. See my picture, attached. The roller looks like my original (the black wheeled roller, loose). Your roller wheels are now white (attached to the door in photo). However my real issue is my rollers are 3/4", but on the 23-087, they're 7/8, and they do ... (cont.)

Roller is 3/4" diameter with offset of 7/8" inch when measured from the inside of the offset; 1" when measured from outside of the offset. I've tried to upload Need replacement ASAP as I'm trying to sell my house. Will pay for expedited delivery/service. Tried to upload photos but kept "Connecti ... (cont.)

I currently purchased a house with a mirrored bypass door where the top track is shorter than the opening. I would like to put a longer track on the top in order for the door not to come off the track. The current track is a double "J" track and the outside wheel diameter of my current top roller is ... (cont.)

Hello. My house was built in 1954. My closet need a new ball bearing slider. It measures 1" across. Can you help?

Hello. I need to replace a closer roller. You have one (Product Code: 84-024T), but it is a bit smaller. The hole to screw in was 1 1/4". Can you assist in finding one. They are old closet doors that I wish to preserve. Thanks in advance.

Looking for 4 of these...