Viewing all customer Discussions for:

23-502 2 Door Bypass Closet Door Hardware Set, 6ft

I need two 6 ft lengths of bypass closet door track. I don

23-056 roller I need roller track 4' or 6' long , how much with shipping to 48218

This is the top rail for a sliding bypass mirror closet door in an RV. It fits your 23-027 roller hanger. The doors hang off the rollers, with a floor guide. The rollers are 7/8" diameter, with a 1 1/2" spacing. Need a new 6 foot top rail. thank you John T

Hi..Have a part very similar to your Kenna 23-048 roller assembly. Mine has a W on it with a crown over the W and then it says 3/4 Front and 1 3/8 Rear...It is 3 1/2 in high and 1 1/2 wide. It is 3/8 from the back of the frame to the offset frame and 3/4 from the back of the frame to the middle of t ... (cont.)

I have a 3 door sliding door closet. The track is bent and needs to be replaced. Its 72 inches long. I want to replace the track mounted on the ceiling and the rollers screwed onto the doors. One door is in middle and 2 doors are on sides. Can you please help me with what I need

I purchased sliding closet door kit at a fire sale. Idid not have hardware to go with it. Is there a chance you can help. the doors are from Kingstar 75151. if you can help it would be appreciated, thank you

Hi. I am looking to replace 72-inch mirrored closet bypass doors on a floor-mounted track with normal six-panel wood doors, still on a floor-mounted track. Do you have the hardware I would need to do that? If so, can you send me a link to what I would need? Thanks, Mark

Hi - I want to make some closet doors for my sons room as the opening is an odd shape and I can't find anything sturdy pre-made. There is a very sturdy looking track already installed on top that I'd like to use - it looks just like the one in your hardware set, except the depth is 1 1/2" (the ... (cont.)

I Have 2 80' slab doors what will be the rough in opening with the hardware be thanks Brent

I am building a closet and will make a set of wooden framed sliding mirrored bypass doors. The closet would take a 6' set of doors. I am trying to find the right hardware combination between the upper and lower rollers along with the top and bottom tracks to match. Would you have a combination or k ... (cont.)