Viewing all customer Discussions for:

32-117 Round Flat Tack Glide

I just purchased 12 of the above product from your company. It appears the tacks that were previously in the furniture were broken off flush with the surface. I can see the pin still in the hole. Where should I place the new tack, in front beside or behind the one left in place? Thank you for yo ... (cont.)

The small circular plastic piece at the front of the bottom of the dresser (where the drawer slides in) broke. The other one is still there. The drawer does not fit properly. I think it is like a tack with a nail attached to it. It's brown. Let me know if you need a picture. Thank you! ... (cont.)

When moving this antique dresser I turned it over to empty anything in the back. Out came these metal clips. Not sure how many I'm suppose to have or where they go. In one of the pictures I marked in red where the wood runner's are wore down. The drawers fit very tight and have always been a little ... (cont.)

Do you have a round flat 1/16" thick tack guide? Like the 32-117 only thinner?

I recently purchased a quantity of round flat tack guides, item# 32-117. When I compared these round flat tack guides I purchased from Swisco to the existing ones, I discovered that the existing round flat tack guides on our Stanley bedroom set were about half the height of the ones that I purchase ... (cont.)

Thomasville Impressions Bedroom Furniture. Plastic guide on the front of the drawer slide rail. I would like to get 6 of these parts. My name is Les

I have purchased some Kenlin parts from you in the past. Attached are two photos of drawer slides that are used on that same furniture. The slides or round discs are slightly thicker than a quarter and almost exactly 1" in diameter. Do you sell such an item? I could not find it on your website. ... (cont.)

My kids have these bunk beds and if you remove the drawer each drawers has one of these white slides/guides ?? that keeps the drawer balanced as well. I cant fina replacements for them.

I bought this bureau from Jordan's Furniture about 20 years ago. One of the plastic pieces in the top drawer slot (left corner) broke and now the drawer falls out when I pull out the drawer unless I'm really careful not to pull it out too far. It looks like I just need that small square piece to be ... (cont.)

Do you have this part for a Vaughn Basset dresser? It is 1 1/8" diameter and 3/16" thick.

Can you identify/supply this part found on the bottom front frame member of each drawer frame. The first picture shows one that is still functional and the second shows one that has failed causing the drawer bottom to abrade the frame.

Hello, I am looking to replace this piece for the contact of a dresser drawer. It is nailed in but has worn down unevenly and catches on the drawer when it is pulled out. This one is on the right of the frame, the one on the left is fine. Thank you for any help!

I am in need of a round flat tack glide for a desk drawer. 3/4" diameter head 1/16" thick head The only flat round tack glide I see on your website is the 32-117 which is 3/16" thick. There is not much play in the drawer and I don't think your 3/16" thick would work. I am thinking ... (cont.)

I am looking for a round flat tack glide, exactly like your product #32-117, however the tack glides I am replacing are closer to 1/16" thick, not the 3/16" of this product. Will this make a difference in the operation of the drawer, or do you have a product that is closer to 1/16"? ... (cont.)

I need some drawer slides similar to your part #32-083. My slides don't have the verti cle pc. as your #32-083 does. It's about 1/2 x3/4, 1/8 thick, beige in color with a small nail embedded in it. It's a front drawer slide on a Thomasville bedroom set drawer from about 1981. Any help? Thank you. ... (cont.)

Good afternoon! Thanks for posting. Please take a look at our 32-083, Corner Tack Glide, and our 32-117, Round Flat Tack Glide. Are either of these parts similar to what you're looking for? If not, please upload a few pictures of the part in question for us to look at and identify. ... (cont.)

I am looking to purchase 2 sets of draw stops. They are 3/16 thick and approximately the size of a quarter in diameter (15/16). Please let me know if you carry this item. Thanks, Deborah

I need replacements for some broken drawer glides on an Ashley furniture dresser. The measurement of the glide is 1/2"L x 5/8"W x 1/16"D. I have attached photos. Thanks

Looking for round dime sized drawer slides for a bedroom dresser. Have not been able to locate them. They are almost 3/16" thick. I am wondering if the depth is a critical point for the drawer to stay level when moving in and out of dresser. I could not find the thickness listed on any of yours. Wou ... (cont.)