Viewing all customer Discussions for:

95-229 3/4" x 7/16" Outside Screen Frame Corner Key

the widest part at the corner is a half inch thick by a half inch wide and tapers down both ways to about 7/16 x 7/16 it does have a small tab on one side to go into a guide inside the screen frame. Pencil pointing towards this tab in photo.

If I send you a sample piece of the screen corner would you be able to help with finding a part?

I ordered the screen frame corners from you, the 95-266, thinking they would fit. In the 1st pic you can see your product on the left and what I actually need on the right I can't find anything like it anywhere. Could I please get some help identifying this piece? Thank you

Dear Sir/Madam, This screen I need to know right size for this parts. Last time I order was wrong and too big. Sincerely, Tamara

Hi, Cannot find this part ANYWHERE. The corner block itself is 3/4" square and 7/16" thick. The legs that slide into the channels are 3/8" thick, 1/2" wide, and 1" long. The standoff spacer on the block is 1/2" high. Please advise if you have something matching this description. Thanks. ... (cont.)

I ordered the Lhr and rh Malta units and need to order the bottom corners. Will the 95-292 work for the two bottom corners? I also want to order new aluminum rails and I don't see where you offer the rails. Can you suggest where I could find rails to fit the 3/4x7/16 Malta corner pieces? ... (cont.)

Attached is the broken part. I tried to find any marking but did not find it. The frame was also attached. It was 18 y old. Can you please help me check which part can fit? Thanks.

I have done a lot of searching, but can't find screen frame corners that match my frames. When I look, the dimensions are either obviously incorrect, or there isn't a dimension listed. My corners have legs (that go into the frame) that are 0.4" thick by 0.5" tall. Both legs are the same size. The c ... (cont.)

The part that goes into the frame measures 3/8ths and the frame measures 7/16ths Do you have this part

Your 95-229 looks like it might be the correct key but it doesn't give the dimensions for the legs that slide into the screen frame.mine are 1/2" x 3/8" x 1" long leg. Could you tell me if the 229 is a match? The only marking on the key itself is a 3. Thank you

hi need 10 screen corners and 5 operater covers

Hello I need help finding the right screen window corners to replace some broken ones on 24 year old Certainteed windows. I have 3 pics of the broken original window screen corner and also 2 pics of the screen frame to see if that is even something I can also get as one side buckled removing the scr ... (cont.)

Hello, can we please get part # for attached screen corners?

This screen corner is 7/16" wide at the corner section (including the ridge or lip) and 3/4" tall at corner section. The screen frame itself measures 7/16". Looking for corner keys with and without stops (need to replace all four corners).

What is your part number for the plastic frame corners?the width of the leg is .580"And the width of the legs with the circular stiffeners are .416" wide

Please help!

I need some replacement corners for my screens. I believe they are anderson windows/screens. Any help would be great. Thank you

7/16corner OPENING OF ENTRANCE OF FRAME 1/2"×1/4 ... THICH STOM WINDOW SCREEN FRAME

Hello, These corners for my screens are either an odd size or shrunk? They are not quite 3/8" and more than 5/16". I assumed they were 3/8" and purchased 2 sets of corners already. Order #1476184 with 95-243 and 95-034. These were too large in both width and thickness to fit in the frame. Should I t ... (cont.)

Hello Looking for replacement corner keys for Superseal double hung screens Attached is the photo leg is 5/16 H... 7/16 W... 1" LONG flange area is 1" there are L and R corners as well as non tabbed Appreciate all your help AL