Viewing all customer Discussions for:

81-258 Ador Hi-Lite Series 1200 Patio Door Roller Assembly

We need to replace the roller assembly and can not find this part in stores nor online.

I have the same roller and it needs replacement. It supports a 60inch x 82inch single pane glass door on metal/aluminum tracks. I have 2 of these rollers at the corners of the bottom and two more at the top corners. I was interest in getting metal wheels or maybe a double wheel replacement to make i ... (cont.)

I do not have a picture of the part but this was taken off the roller The part is over 200 miles away, but when I travel to the destination I will take a picture of the part if you are unable to locate it from the above

I have an archaic model. I've seeing that the new replacement number is 81?258. I know that I need to remove the corner bracket from the old roller. What I need to know is does the new bracket or housing automatically come with the replacement roller? If not how do I order the replacement roller ... (cont.)

Hi: Here's a photo of a nylon wheel unit from a 3-foot-wide HiLite door. What I need is the steel wheel part to replace rollers on a larger HiLite door--4 feet wide. I don't have a photo of that one. Suggestions? Thanks!

Do you have this part with Steel wheels? Thanks

Do you have this part with Steel wheels? thanks

I just want to make sure I get the correct part. I'll need 4.

D/M 3137026 A/S 30S7401 (see attached photo)

The attached photos are of a roller that broke off of the sliding glass door we have. It says Kilian, Toronto Canada - Syracuse NY.

I need replacement roller assembly for herculite k sliding door 3/16 tempered. This assembly has small prongs that slide down.

For older mirrored sliding doors.. Thanks for any help finding the correct parts.

No part number, wheel stamped with 'KILIAN', 'TORONTO CAN', 'SYRACUSE NY'. Door probably installed mid-1960's

can you ident the roller. I have attached a pic. It is most similar to the 81-022 as far as I can tell thanks

This part slides onto the bottom or the closet door. There are 2 rollers on each door. D/M 3137028 A/S 3097401

Hi, My part is stamped US PAT D/M 3137028 and A/S 3097401. The roller assembly is on a mirrored closet door. Can you please recommended a replacement part. Thank you, Louise

need to replace rollers on sliding mirrored closet door. only info I have is as follows pat no D/M 3137028 A/S 3097401 Lillian Canada----Syrcacuse NY Any alternate if not avallible?

Please look at this roller assembly and tell me what you have that would match . I'M Going To Need A Large Quantity 100 or so. Do you have a part that would match this one? We Don't Want To Make any Mistakes Thank You

Please help me find a quantity of six rollers like this. Thanks Gary

Need a replacement roller - wheels are gone! I think the wheel was 1&1/2in. The housing is 1&5/8 in long and 1&1/16in wide and 3/4in thick