Viewing all customer Discussions for:

58-173 Push-in Vinyl Bulb Weatherstrip

Hi I need to replace some weatherstripping on numerous door and I am having trouble finding what I need. Attached are photos of the kind I need both in tan

Looking for the piece that seals the doors in the center when closed. The pictures attached are of two places where the seal is failing (Top and Bottom).

I am looking for weatherstripping for caradco windows. Please review the photos. I was not certain on which weatherstripping I should look at. It looked like bubble seal, but then again it also looked like vinyl. Could you please advise me on what you believe I should get? Thank you ... (cont.)

Hi. Can you help me identify the manufacturer of my basement window pictured? It is an inward open French casement window. I need to replace the bottom weather strip / seal. It is compressed and allowing water to seap in during heavy rain. The drainage track and holes clear. The only identifyin ... (cont.)

Looking for 96" door edge replacement like photo

I have I believe Stanley Wood Framed Exterior Doors the weather Stripping fits in the Kerf and it looks like your 58-008 compression part or the 58-173. My weather Stripping is soft like some kind of rubber. I built my house in 1993. I have 3-36" Doors and 1-Double France door unit that has 2- 36" d ... (cont.)

Need weather striping for Kolbe patio door

Good morning--I have been looking to replace the weatherstrip on my exterior doors. I believe that your item 58-173 is what I need. I have attached a picture of the current weatherstrip together with a drawing (not to scale-obviously). Would you be able to send me perhaps a 1" piece so I can conf ... (cont.)

Looking to replace this unique stripping. Looks like your product 58-055 may work but not exactly. Please advise.

I would like to replace the attached weatherstriping. The door is a Pella hinged patio door which was installed in 1990.

I need to replace the weatherstripping around my back door. It looks close to the Pella Push-In Bulb Weatherstripping (part 58-181), but from the picture, you can see that the piece that fits into the gap to secure the weatherstripping is in the wrong place. Any thoughts?

Looking for this or similar in brown up to 9 ft. Pcs

This is the weatherstripping for a 1994 Crestline french door, single inward swing. There is no identifying mark on the metal between the glass panes (There is a single pane of glass on each side) other than the CIG 04IGCC CBA 94 that repeats. I need 30 feet of a matching strip. The door is ... (cont.)

Looking to replace weather stripping for 6 millgard french door - made in 2003, out of warranty and discontinued by manufacturer. Windows are still in good conditions. Can you help me find the parts? Thanks

I need door seals for a caradco door , and bottom sweep! Hope you can help

this seal was taken off an older wooden door jamb. it is a spring type but has a kerf on it . the distance between the jamb and the face of the door is only 3/16". new doors are 3/8" and i had tried the foam seals that are installed in newer doors but the seal wouldn't compress enough. ... (cont.)

I'm trying to find a match for the vinyl bulb door perimeter replacement weatherstriping. Pls suggest a similar type that will fit the sample photos attached. Also do you carry PEMKO Mortised automatic door bottoms for 32" Wide wood door (1 3/4" thick) Thank you.

I am trying to find replacement weather stripping for my front and back doors. I found the correct weather stripping on another web site but is says it is discontinued and suggested a replacement. Unfortunately, the suggested replacement is only available in tan and I need either the original blac ... (cont.)

This worn out weatherstrip is tightly adhered. Do you have a replacement? If so, how is the old strip removed? Thank you.

I can't find any markings on the door or weatherstrip but I'd like to replace the weatherseal. It's approximately 180" long, it's in three pieces. Any help would be appreciated.