Viewing all customer Discussions for:

39-370 12" Push Bar Operator

Can you help me replace this Truth window push rod and hardware?

Hi, I am trying to find this hinge assembly for a number of old windows I'm repairing. The owner wishes to keep the windows as original as possible. I could use 10 to 12 of these. Please let me know what you might have.

Hello, I recently purchased a home built in 1928. The home still contains its original window glass, casements and operating hardware, however, some of the Fenestra operators are broken/missing. I've attached a photo. The arms measure 12" long. Do you sell these? If not, can you provide me any ... (cont.)

i have original 1960 awning windows, and despite searching the ends of the internet for any information on what type of operators these are and where to get replacements, i have literally come up with nothing. at this point, im just wondering how much of a task it would be to basically retrofit thes ... (cont.)

Can you source casement push rods as shown in that attached photo along with the associated brackets that came with them or a replacement that will work. These are commercial casements with a 4 bar hinge. The only thing that opens or locks them is this arm

We need two operating arms. One left hand and one right hand. Two lock assemblies. The house was built in 1959. The fastener hinges are broken. David

the clamp at the end has broken on my very old window, do yo make any like this?

Hi, we are trying to find the push bar guide assembly for some awning windows. We are unable to find any manufacturer information on the window. Any help would be greatly appreciated.

Hi, please let me know if you have a telescopic bar operator like this.

PICTURE #3 IS WHAT THE FIRST (2) ARE SUPPOSE TO LOOK LIKE, CAN YOU MATCH THIS? THANKS

I am looking for part for an Andersen push bar operator that attaches to the awning window. I cannot find a replacement so any information will be appreciated.

Greetings.I believe our 1923 Sears and Roebuck home had Pella windows installed in the 80's. I have attached a couple of pictures of the awning type window that we are missing one of the knobs at the end of the straight arm which also serves as a lock. I may have some of my terms incorrect so plea ... (cont.)

Hi there, I have an awning window with a broken 1866 Curtis operator that I would love to replace. My local window store has left me out in the cold for helping me find a viable replacement/substitution. Do you have any viable options available? Would be happy to supply more info if it would be help ... (cont.)

I'm looking for the following replacement handle

I am needing two of these pulls for windows that are missing them. Not sure where to start and having no luck online.

Good afternoon, I need to replace all the stays in an old house. They are all the same, just mounted in a different configuration based on the window opening. Do you have something like these?

This is a push-pull operator that is approx 8 1/2 inches overall. KSI or KS1. Do you know or have anything that might replace this.

Hello, we have recently purchased a home built in 1956 with original living room windows. The top windows are awning windows and currently just have screws where some kind of push bar was attached. See photo. There is a hole where I assume this bar would go through, along with something that looks t ... (cont.)

I have a historic home in Jacksonville, Florida that needs replacement window operators for Crittal steel windows. See photos. Do you possible have something like this?Ron

I just bought a house that was built in 1958. Most of it is original. I have a lot of windows with these and many are broken. The windows are actually painted shut ? and apparently people tried to force them open using these operators. I'd want every window to have the same hardware old or new. T ... (cont.)