Viewing all customer Discussions for:

39-370 12" Push Bar Operator

We are looking for parts to these stays on the casement windows. Someone thought they were an old Pella design. Any help in identifying the these would be very much appreciated and of course if you have the parts. Thanks

Good Afternoon, I am looking to get (15) sets of the attached window latches and keepers.

We need replacement Fenestra casement window openers for the 1935 home we're renovating, but haven't been able to find them anywhere. Can you help?

Need help identifying hardware for these Pella windows

Do you have this hardware, or something like it that would work? Thanks.

I have purchased a TH-23076 and a TH-23077 from Home Depot. They do not have the guide attached to the window that the roller would fit in, nor do they have the crank and crank cover. Can you help me? I need on for each side.Thanks,Glenn

I am trying to identify the manufacturer of this window. The house was built in 1960 and the awning window is of a hinged metal operator that is unfolded and then you push out the window with a bit of force. I am trying to figure out how to remove this window so that I can install new windows. The ... (cont.)

My 1957 ranch home has original windows that I am trying to restore. There is this push bar hardware piece that bends at a right angle when closed, and straightens to push the window out. I have several windows that are missing it need this piece replaced. Any ideas are most helpful. Thank you ... (cont.)

Research tells me these might be pella? Anyway, need some parts to refurbish some windows.

Andersen. Basement?? window opening handle , cracking to the right , no mechanism

Please see attached photos of the current casement operators. This part of our house is original from 1939. The window casements will require long screws to fasten securelyCan you please advise regarding getting replacements?We will need 4 pairs of replacements (left and right for each pair).Than ... (cont.)

The handle opens and closes the window. The window said Sigco on it. The picture on the left is the how it should look like, the picture on the right is broken at the screw area. Looking to getting help on where to get part. This is a company.

Andersen circa 1954 push out bar(s) needed (8). These are NOT attached to a crank. Thanks!

We are officially desperate and would appreciate any help you could give us finding this hardware. These are Anderson awning windows from the late 50's. No crank. It uses a lever system, where a hook at the end of the lever connects to a small bar on the window. The issue we are having on 8-10 of ... (cont.)

The plastic tip of the assembly has broken off. I'm looking to replace the entire assembly. The home is about 50 years old. It's an Andersen window.

Attached are pictures of casement hardware of an original 1938 window. I am missing the crank and latch for the window but would be willing to get all new hardware if you have something that works. The window is only 13" wide.

Hi, We live in a condo that was once an early 19th century manor house. We do not know how old the windows are, but the cranks appear to be antiquated brass cranks (that need polishing). One of the cranks is broken, and we are interested in finding a replacement for it. The base of the crank measure ... (cont.)

Looking for 6 (3R & 3L) operators. 2 sets for casement windows and 1 set for awning window application.

Looking for these window operators left and right side

Looking for replacement Pella awning window hinges