Viewing all customer Discussions for:

39-370 12" Push Bar Operator

I am looking for windows arms for our church. The long arms is about 13 inches long, 5/8 inch wide, 5/16 inches thick. I am also looking for the "ring" like handle that attaches with 2 screws.Thanks John

Hello, Lost our house in recent fires. Bought another 1940 built house. All window operators are of this type. What make are they? Are there replacements?

What can be used in place of this type of latch? I have one window without a latch entirely and need something that locks. It does not necessarily need to prop open, but release for safety reasons. The windows are metal.

No name square Damaged teeth slipping 10¾" from center bolt to end of square shift. Has a square key on crank side

would be very grateful to know if you have this type hardware in stock. Length of bar when extended is 17-1/2". Windows were installed in 1966.

I need a bunch of these, Andersen doesn't make them anymore. Do you have something that will work?

Hello,I really hope you can help!!!!! Attached are photos of my old porch windows. House built in 1909. I have all the original cranks, replaced the original hardware at least 10 yrs ago, but the guy does not remember where he got the hardware. :(I replaced that hardware last year with the curren ... (cont.)

Hello, Would you please be able to identify and quote a cost to me for one of these broken handles? Thank you, Bob

The metal frame that holds the sliding bar appears to have a spring wire broken. Is there a replacement part? Photos are of part removed, close up showing wire twisted out of place, and same part installed in another working window.

I have a window that has a bar that can open and lock the window. It's mounted on a pivot joint so it can rotate freely. Used on an awning window.

Let me know if I have that parts available

It is bronze in color. Held by a pin. Probably 1960s-1970s. Andersen brand

brand fenestra detroit windows looking replacement manuel cranks

Where can I find one of these brass casement Window adjuster arms with track - base is 8.5 inches?

This house was built in 1959 and I need some replacement parts or something I can use instead to fix. The plastic part the arm slides in I need a few of those. A set of complete replacement arms would be great also. If nothing else, could you tell me what type of windows these are? Thank you Tam ... (cont.)

Please help me. Let me know if you have something similar to this mechanism for closing the window. Material metal, color as in the photo.

Hi I have a customer looking for these handles for their windows. Can you help me identify please. Thanks!

I am looking for replacement guides for these Pella casement window stays. I have four windows that have guides broken to some degree or another. Also two of the stays are missing the screw-in knob / handle at the end of the stay bar. If exact replacement knob is not available, I will need four o ... (cont.)

Looking for replacement for the crank

Hi, can you help me find replacement components for my 1930s fenestra steel windows please. I specifically need the push rod system to open and close the windows. Thank you