Viewing all customer Discussions for:

23-242 72" Sliding Mirror Door Bottom Track

Dear Swisco, I need a 72" Stanley/Monarch mirrored sliding glass door track. The label on the back of the door has these numbers in sequence - 0606942 240824. The metal track (1995/96 build) is grey in color with concave rollers. The exact current measurements are 71.5" length with 3.562" width. The ... (cont.)

‎I have a set of 3 mirror bypass doors that I am need of a track for. I purchased a foreclosure home that much has been stripped out of. I was lucky enough to get the doors but the tracks are missing. I have 3 sliding bypass mirror doors with bottom sliders 23-199 and top guides 23-038 a ... (cont.)

Are there universal bottom tracks and new rollers that I could replace on my existing Stanley Mirror Sliding Closet Door? I have never been real impressed with the ones that came on the original door. I put a new wood floor in the bedroom so I had to take out the door and track and then reinsta ... (cont.)

I purchased 2nd handhand 3 Wardrobe doors which came with no rails. I have identified that the fittings on the doors are made by your company. I have searched everywhere and can not find rails to match the doors. Could you please help me with the following questions? 1. Can I change the fittings ... (cont.)

I am looking to replace the bottom track of Stanley Monarch sliding glass doors 50822981 / 64564-001. I also need the rubber rollers for the top track guides. Can you assist? Thank you

I'm looking for a bottom track like the one in the picture the bottom roller is a Stanley 17426y000 can you please help thanks

I I need this track not sure what model it is I already ordered 23-272 was wrong can I replace the rollers that work for the track I ordered or do I need the track that is needed for the rollers I have

The size that I need is 5'10 1/2. is it possible to get that exact size sent to me?

I have a 17-year-old sliding closet door that is 72" wide. The bottom track has rusted and the doors don't slide very well anymore. I am attaching 4 pictures. It is a Stanley/Monarch mirrored door, model #64564-001. I hope you can help me. Thanks.

I recently ordered a 72" Sliding Mirror Door Bottom Track (23-242) and a 48" Sliding Mirror Door Bottom Track (23-240). Unfortunately, the bottom door rollers I have are concave and too wide to fit in these tracks. After speaking with Jody, it sounds like I have two options; either swap the track ... (cont.)

Thank you for your help

We want to replace the bottom tracks on the sliding mirror doors at two closets. We need a 48 inch and a 72 inch piece. The doors were installed in 1990. It appears your product codes 23-242 and 23-240 are similar. I need to confirm that the bottom rollers are convex. I believe they are. There are n ... (cont.)

3 5/8 * 72 length and width of track. gap between two tracks is 1 5/8 the glass is made by stanley i need to know if the 23-242 is the correct track attached are images of bottom track, lower and upper wheels.

I bought a condo that has sliding mirror closet doors but the bottom track is missing and I don't know what kind I need. The doors have rollers like your product 23-041 (the rollers on my door have the number 4012 on them). What track would you suggest I get? Also, how would I attach the track ov ... (cont.)

My daughter's closet has three large mirror doors that operate on a two door track. The doors constantly bang into one another. Do you have a 3 track bottom track that you sell that would allow all three doors to slide independently?

I need a 60 inch bypass bottom track for a Stanley mirror doors. Part number 64564-001 do you have that part?

My bottom Track looks totally different than any I see on the website. Can you tell me the part #'s for top & Bottom? My bottom track has a center that you have to nail on top of a narrow strip of MDF or wood, in order to install it.

Looking to find a replacement track and wheel. We need it in gold trim. Please let me know if you have anything. Thank you

I have a Home Decor Innovations model 425 sliding bypass door. It has a top and bottom door track with the weight of the door supported by the bottom door track. I am looking for hardware to build a sliding bypass knee wall door with a rough opening of approximately 132 inches using the same hardwar ... (cont.)

The description for floor track #23-242 states that it accomodates convex rollers. I believe this is wrong and want to make sure you made a mistake before I buy the 72" satin nickel one. Please verify. Thanks