Viewing all customer Discussions for:

19-041 Channel Balance Top, New Security

These parts have come off my hurricane windows. The windows do not move smoothly up and down or stop where they are supposed to.

A sliding window, not Andersen (see the photo). Part length 30". Marking 2950.

The length of the balance metal part is 24 inches and the length of the window sash is 25-1/2 inches.

Binnings Pan American Model Pa-14 SH Length of balance actually measures to 30 inches

I have 15 windows with IWC WINDOWS THAT I'd like to replace the balance assts. the metal channel is 17" lg

I need four window balance for my Traco 240 Series, Miami-Dade single hung impact windows. The existing balance are stamped 23DS 38 and have stamped BSI PP; the sash measure 50 1/4" x 25 7/8";The steel portion of the balance measure 24"x 5/8"x5/8" The balance top appears to be # 19-041 and shoe # 15 ... (cont.)

Can you please tell me what I can use to replace this?

The stamp is 2390 rk 26. It measures 24" metal only.

my old channel ballance has 1/2 in width and 1690 will the 1650 you sell work?

Hello I need a bunch of these but which model 380 or 385 or??

Hello. I need to replace two balances. They are marked 2720 but I'm not sure what top clips I need. I have attached a picture of the clip retainer at the top of the window and the clip as it sits at the top of the balance. The width across the white clip is 7/8 in. Appreciate any assistance. ... (cont.)

Hello dear, I also need 12 balances for 6 bigger windows, do the balances come complete with shoes and tops? Thank You.

I'm looking for the correct replacement for my window. The pictures attached is the old one. There is a number stamped 2316 in the metal. It's 24 inches long. Thanks. Sean

Hi I need 4 window channels in the 1775 option, based on my old stamp of 17DS29. My window weighs @30lbs. The parts are all exactly the same as in these pictures including the stop. The main metal channel is 18" length. How can I order them for my hurricane windows? Thank you

traco 23ds-38 I believe top is 19-041 and bottom is 15-005

I need to replace the channel balances on our IWC single hung windows. The balance length is 24", 1/2" wide, marked 23 20 DS and I was initially thinking the 377 2320 would work but the top looks more like a 19-041 than a 19-018. Could you advise? I've attached pictures.

Window is approximately 24" high by 52" wide. It opens/closes up and down. I need to know the price and model for each channel balance piece.Markings on the metal say,23DS rh38Thank you,Ana

I need 4 pieces -- 24 inch

I need 6 At twenty four inch I need eight at twenty one inch Is this possible

GOOD MORNING,I HAVE SENT SEVERAL PICTURES OF 2740 BALANCE ROD & CLIP NEEDED TO REPLACE 8 OF EACH IN ALUMINUM WINDOW.LET ME KNOW IF YOU CAN MATCH UP CLOSE ENOUGH TO WORK OR IF YOU HAVE THEM.THANKSRENEE