Viewing all customer Discussions for:

81-261 Roller Assembly with 1-1/2" Steel Concave BB Wheel

This is from a screen door roller in a tri-sliding glass door set that has built in tracks for the sliding screen doors. it's about 2.5 inches long. It's all metal including the wheel.

Hello, Can you please let me know which wheels I need to order.

I found a replacement wheel at my Home Depot, Barton-Kramer 461 Crown/Lawson Roller ASSA. Even though the dimensions were correct this replacement had 3 pimples and 1 half pimple on the sides. I was able to fit this in place however the 3 pimples spread the bottom rail to a point where it could no ... (cont.)

This old door (25 years+) has a single roller on each side. Is it possible to get a replacement that has more than one wheel (2 or 4?) to replace it? Thanks! Mike

Morning! Could you all identify this part for me? It is a patio door roller and measures 2 ¼ x 3/8. Thank you!

Hello, I need rollers and door handles from my early 1990s PGT Sliding glass door. Can you please call me

Looking for replacements for 2 rollers

Need multiple replacements.

I need to get a replacement for the rollers for my sliding glass patio doors. The wheel diameter is 1 1/2". There are 2 screws which attach through the frame, the adjustment screw and another screw. Please let me know which product would be the best replacement.

The roller shown in the photos is from a 5' wide metal sliding door installed 8n about 1984. The door opens from left to right and the roller is at the bottom left corner of the door that slides. There are two pieces and the inner piece has A S stamped on it. The actual roller wheel is gone ... (cont.)

disco 1103

I have sliding patio door. I cant find this roller on your website. There is a similar roller assembly 81-006 but it is shorter in length. Will this fit (width and height?

These are 30 yrs old, I believe the company is Harcar (a FL company). The rollers look like your 81-020 or 81-261 (whats the difference?) Many thanks

Hi can you help me identify this roller? 1.5 inch steel roller. The aluminum frame is 1 15/16 wide by 1 9/16 high. It says DISCO 1214 on the side. There are no other markings I can see Thanks

Everything is rusted. Thanks for helping.

I am looking for these sliding glass door rollers. Glenn

need rollers for PGT sgd - about 25 years old - just before they started with impact glass (mine are not impact)

Would be beautiful if you can identify today so I can locate and buy. Measures 2-3/4 long 3/4" width and 1-9/16 height. 1-1/2" roller wheel 2 holes

I need 4 replacement roller corttridges

Do you have replacement wheels for this patio door? Also are there any videos of how to replace the wheels? Thank- you. Photos of roller