Viewing all customer Discussions for:

81-261 Roller Assembly with 1-1/2" Steel Concave BB Wheel

My single roller dimension are as follows:Body dimensions:2" long (main body only)1-9/16" tall3/4" wideWheel diam= 1-1/2"No markingsIs there a stainless steel version available?Is there a sealed bearing version available?Thank youDave

Hello Do you have a replacement roller for the GACO 4030H. The sliding door is approximately 28 years old. Dimensions are 1 1/2 inch wheel diameter. 13/16 inches wide base. 1 1/2 inches high.

Trying to find a replacement for these 2 rollers.

I received the rollers I ordered. Unfortunately they are slightly bigger than the current rollers. I'm attaching a picture, looks like an 1/8" too big. The wheel itself is 1 1/2" I saw the model 81-261 was wondering if that might work?

I need two new rollers for the PGT series 2500 sliding glass door leading to my lanai. The home was built in 2004. Can you please identify the roller assembly for me and place an order for two of them?

Photos included. Width 11/16" or 3/4". Height 1 5/8". Diameter of roller 1 1/2"Angel I need 8 total roller assemblies.

please advise me as to what parts I will need I want to replace both sides Thank You

So happy to find this website. Can you tell me what part I need to fix my 35 year old sliding doors? I have 2 doors with same type of assembly. 1 1/4 inch wheels. The door frame is marked "Payne Door Company".Thank you for helping me. I have spent quite a bit of time, and could find nothing that loo ... (cont.)

Need to replace both rollers on late 1970s aluminum patio door. Single rollers are installed -- Either single or double rollers are fine based on your recommendations. 6 pics are attached of the roller currently in place.

Hi, I'm looking for a set of replacement rollers for my sliding glass door. They're 23/32" wide x 1-9/16" heigh with a single 1-1/2" diameter metal wheel.Thank you for your help. Thanks Mike

Looking for sliding glass door roller, moved in this house in 1993, built in 1992

Trying to find replacement. It's marked Disco 1103. Width is 3/4 Height is 11/2 Wheel is 11/2 OD and is 1/4 inch diameter.

I need this roller. It has (ADH) on the side and a barb on either side to lock into holes on the sides of the door.

I attached photos. Measurements 15/8 high 21/2 Long 3/4 width Please advise if replacement rollers are available. If not I have to replace door. I am open to buying more than one style or part number if in doublt. Please advise ASAP. Wayne

I need a replacement top guide, similar to your part 86-025 but mine is only 7/8" wide that must slide into the frame. Im also looking for better rollers, I have 1 1/2" PLPCI.net D 1822 rollers, look like your 81-261 product but they are so noisy Is there a replacement that has poly wheels? I nee ... (cont.)

I have a set of Pan American sliding glass doors that need replacement rollers. The sticker on the door jamb says Code 15-3, Series PA-9-1. I can't find anything that matches the roller assembly anywhere. Thanks.

Hello! I am having much difficulty identifying the brand name of my sliding glass patio doors. I need to replace the rollers: AAMA SPONSORED MANUFACTURER STIPULATES CONFORMITY TO ANSI/AAMA 402.9 CODE: HA-1 SPECS: SCD-A2 SCD-A2-HP(68) SCD-A2-HP(83) SERIES: SLIDING GLASS DOOR

The roller appears to be 1.5 inches dia and the housing looks like 5/8" in width.The housing length appears to be 3.00" with a height of about 1.75". Notice the retaining nubs that are on the side to position it in place.

Please let me know if you have these so I can order thanks, Richard

I purchased four of the 81-261 roller assembly. It does not quite fit since it is 1 5/8 high and it turns out I need 1 9/16. I looked at 81-245 and it has the right dimensions, but is plastic rather than steel. Also these other 2 have the adjustment screw on top rather than the middle of the assembl ... (cont.)