Viewing all customer Discussions for:

95-231 5/32" Tilt Key Pair, BF Rich

Can you id part number?

Hope you can understand my drawings. The right hand corner guide has the number 814 on the top leg, and the number 3 on the leg extending down. The sliding latch has no numbers front or back.

Looking to replace this tilt key

I think I see this part there, but I figure it'd be best to check with you first. Just to be sure. Man, I gotta tell you, it sure wasn't anywhere near as easy as Mike makes it look. Getting it out of the frame, I mean. But, boy, am I thrilled to find, thanks to you, this turns out to be yet another ... (cont.)

Need these parts. Client has walk thru with landlord on 31st.

Not sure which part(s) I need, and didn't want to take this corner apart any more than it already is without some input.

I need to replace all corner keys and latches for one storm window (4 corner keys and 4 latches). The windows have no identifiers at all - no names, numbers, or markings. I don't see an exact match for them on your web pages, so I'm hoping you can find a match.

The sliding bolt is with the handle on the picture, but I don't need the handle, just a straight one. I chose the best I could, sine I couldn't fine exactly the same as mine, but I hope those will work fine

Trying to get replacement part for top Left top tilt.I thought I could use 95-026 and 95-027 with a 1/8 inch spacer but tilt would not be in the right place to make everything work.Tell me what you think.Thanks for your help.

I need to know which corner key matches with this tilt key.ThanksSarah

All 4 corners of the bug screen insert for a storm door are broken. Bar and unknown. Legs are approx 1/4"x3/8" and 1.5" long.

My house was built in 1975, with old storm windows. Some corners and latches are broken. Can you help to find the right replacement parts? I mean the corners in the above picture. Thanks

looking for framing , latches, and pins. framing is 3/8" thick. framing has a flange to control the insertion of frame

I need above parts I add in this photo. Please advise. Thank you.

I was hoping you could identify these parts and give pricing. Thanks

Hi my name is James. I'm gonna need a set for each window of top and bottom pieces pieces if you can locate these. And I'm also looking to have a screen made for this screen door I don't know if that's something you could do and ship or if someone in the Springfield Massachusetts area would be abl ... (cont.)

I'm looking for these swivel corner keys and also a couple on the latches. As you can see from the photo that the key on upper right is missing the downward part of it, the left one is ok. The lower right latch has the same problem, it's there it's just broken off. The other issue in findings these ... (cont.)

Hullo, I have an old screen with one broken tilt key. I will photograph the remaining good one, and remove it and photograph. The lock clips at the bottom are cast with words " perfect" "seal" at L and R. Maybe a brand name? Thank you, Ian

I am looking for a Tilt Key in the same dimensions as your Window Corners (95-105 and 95-106). You can see in the photo that the upper leg width of my broken Tilt Key and the SWISCO Window Corner are both 1/4". The other leg of my broken Tilt Key is 5/32" exactly like the Window Corner (95-105) that ... (cont.)

I have broken pin brackets. they use a screw to hold in place & they measure 3/16" x 1/4". Do you have replacement parts?This is with my broken latches on your reference # D167722Thanks,Jim