Viewing all customer Discussions for:

81-263 Capitol Door Roller Assembly, 1-1/8" Concave BB

The diameter of the wheel is 1 1/8". Note: the photo of the part outside of the door is very bent from removal. there is a hole for a screw on top of the part (see in photos) that holds the glider in place. If helpful, the manufacturer of the door was patio enclosures, inc.

Can you help me find replacement single rollers measuring:2.2 inches long1.1 inches tall5/8 inch wideScrews upwards into the wood through small hole on top of the frame. The wheel diameter is about 1.1 inchesThank you

I'd like to replace my existing roller assembly with the 81-090, but I don't see where the 81-090 could be secured to my sliding screen patio wooden door. Mine has a screw hole on top of the housing for securing it to the door. My existing roller assembly has 1" Diameter wheel, 0.5" housing width, ... (cont.)

Need 2 of this kind

This is a bottom roller assembly in which the bearings are bad. I can't find a replacement part(s) anywhere. It measures 2 3/16 x 1 1/8. It is 1/2 inch thick. The roller is concave and appears to be 1 inch diameter.

Looking for replacement rollers

Cant find these rollers an your website. Are they available must be stainless steel

3 3/8 X1 3/8 nylon wheel is 1/2 w My name is Robert and looking for rollers for my Sid-ing door. Can you help me? Thank you

I need to replace the rollers on a 6 year old Reliabilt sliding door. I took these pictures but did not measure the old rollers. They are about 3 1/2" to 4" long and maybe 1 1/2" tall. This is the information stamped on the side: L-O-RICCI-TOOL NC 514-643452C Thanks for your help Mike ... (cont.)

I hope that you can help me find replacement wheel assemblies for my patio sliding doors. The doors are made of wood and quite heavy so the wheels need to be metal. The dimensions of the assemblies are 2.125" x 1.125" x .5" and the wheels are 1" x .25" w. I need 4 assemblies.

hello: I am trying to find rollers for an old skyline door and I think code 81-270, which is like the 1.5 inch roller I have, will work, but the 81-263 seems good too, but it is a smaller wheel. Is a big deal to use a smaller wheel, assuming all the rollers are replaced? Do you do COD delivery? ... (cont.)

Looking for these rollers

Looking for replacements for screen door roller assembly. Size is approx 2 1/4 x 1 1/4 x 1/2 inch.