Viewing all customer Discussions for:

39-385 Egress Roto Operator, Pella

Hello, I have an older pella window where the plastic hinge shoe has broken. Any suggestions on how best to find a replacement? Any suggestions would be greatly appreciated. Many thanks!

These are the ones that are on our windows. Need recommendation for replacement.

These are Pella windows from around 1995. I would need three right handles and cranks and two left handles and cranks. The arm is about 10 1/4 inches. I think they come in units so a total of five altogether. and those are old Pella windows. Pella windows replacement cranks Thank you. ... (cont.)

hi, we have these old pella windows with a lot of broken cranks. however I found out one of them was replaced with a much better and simpler design. i took that off and am sending you the pics of the one I want. its a simple crank that moves a straight arm, and at the end of the arm is a little plas ... (cont.)

Will not close.

I am looking for a Pella casement window crank/arm replacement part (1988 DOM?). Thank you.

I need Left and right sides, I don't know what size, please help me, thank you.

Hello I am needing what I assume is called a bushing. It is 2.5" long and sits inside window track as pictured on second photo (taken from a working window). First photo is for reference (not my window) but shows where the part sits. The arm connect to the plastic bushing which slides along bottom w ... (cont.)

I own a house with pella casement windows. the house was constructed in 1987. i bought some replacement window cranks thru Swisco which have worked well (39-175 & 39-176 units) for several of the larger casement windows. However two of the casements are somewhat shorter than the rest and have a diff ... (cont.)

I'm looking for the hing hardware and how to replace operating arm seems to work ok

There are no markings on either the window or crank. I do not know the manufacturer. This part is roughly 40 years old.

Hi folks I need your help with a part for a Pella casement window. I need the little plastic part that holds the operator arm to the track on the sash. Also looks like I'm gonna to need the top hinge arm too. It opens on the right when your inside.

I'm seeking a replacement for my existing crank assemblies as seen in the attachments.

Hello. I have a similar need for my 1980's something Pella casement window. The bottom sill stop is broken and needs to be replaced. We also need a new operator. I can't find a product number anywhere, but have attached photos of the operator and pieces of the broken stop. The stop measures 21-1/4" ... (cont.)

Looking for replacement parts for pella window

Looking for replacement crank (rotator) I have Pella windows.

The slide at the end of the arm shown was a thin brass piece that slide along a brass track fastened to the awning window. I broke the trying to remove, as they were very thin! It seems to me an arm and operator similar to the picture along with a track to attach to the window would work. Any rec ... (cont.)

Hello I am looking for a replacement part for my pella window it is over 40 years old and it snapped.

No numbers or markings. Approximately an eleven inch arm with a nipple on the end to hold a guide. I also need the guide. I think it's plastic thanks! Danny

I need approx 20 of the small plastic (track Guides) shown in the photos. They attach to the ends of the casement operating arms and they slide within the metal track. The tracks are located at the bottom of the Interior face of the sash. The diameter of the hole, in the plastic slider is 3/16". ... (cont.)