Viewing all customer Discussions for:

38-154 High Profile Wedgeless Window Fastener, 1-1/4"

Hi. Looking for something similar to this. Hole to hole seems to be about 2 3/8. then Width or Height is 3" and the thickness is 5/8" . Thanks!

please help me identity this part. thanks!

Do you sell this same handle but with 1 3/8" mounting holes?

Screw hole openings are 2 3/8 " and not the 1 1/2 " shown in your catalog. Else they are identical in every respect . I'm having difficulty sourcing these The plastic wedges are broken in many existing window units and need to be replaced

On the inside frame there is this number. SUCL LOHE4U7EGM. 2173866-001

handle / lock. Black or Bronze finish. Mounting base has broken and appears to have about a 1 1/2" hole spacing. Handle is on the left side of the window as seen from the interior.

Hi,I am a property manager in Sausalito, Ca. Attached is a photo of a broken handle. I need 5 of these.The only marking is WORLDATS 1/8 R & CAN 4 .I presume the R stands for R.I would need 2 Right and 3 Left.Do you stock or sell these?Please feel free to call me at any time. Thank you for your ... (cont.)

Awning window latch for Viking window. Bronze. Please see photos.

I have a handle that broke off my window that I think might be Milgard brand. I am looking for the handle that you screw around with two screws to the window and you just rotate the handle and it pushes a flap against the window frame when you close it to seal it and lock. Please see pictures. Can ... (cont.)

I'm told these are Milgard windows. No idea when they were installed. The handle has a kind of "flap" that pops open when unlocked, and when the window is closed and locked, the flap goes over the part attached to the frame. If it's not aligned the handle breaks.

Hi guy, this latch is from commercial window latches installed about 20 years ago.thanks.AL

Here is the part I'm looking for. I'm looking for 70 of these partsDo you have bulk pricing?Thanks!Gary

This hardware came off a small swing open window in the bathroom. It came off a CertainTeed Auburn window. The lower plastic swing piece has broken. The hole spacing measures approximately 2.25" I'm looking to purchase a replacement. Another style latch is also ok as long as it works and fits the a ... (cont.)

Not sure who the maker of the latch is. Residential storefront installation of a. bottom and upper hinged swing out window. The bottom cam latch piece snapped off. Of the two pictures, the one ending in 50, is the broken one. I was able to save the cam piece and get the handle to close over it f ... (cont.)

It looks like your wedgeless cam handle is just what I need but the size is different. 1) total length = 3 inches 2) screw to screw length = 2 3/8 - 2/12 inches 3) total width = 1 inch 4) width of hardware without handle = 1/2 - 5/8 inch 5) length of handle = 4 inches

The handle broke off our bathroom window. The part number seems to show serial #910-C/911-S/911. It says it's made by Truth Hardware, Anderbert Mft. Do you know if we can purchase just the handle? The rest is working fine. Mary

Would the handle in the picture match 38-173 or 38-155? or is there another compatible part?

Do you carry the window locking handles (attached)? Thanks, Charlie

Searching for a window fastener for an Insulate 700 bedroom window. The center of the screw holes are 2 1/2 "

Hi I broke one of our handles from our Milgard, aluminum windows. The house was built in 2007/8. How do I find replacement parts?