Viewing all customer Discussions for:

90-278 Lock & Keeper, 2-1/16"

Need replacement bottom seals. I see a few that look like my windows but unsure. All windows r old so don't know and cant locate the model#/type.

Hi, Need the right part numbers for parts showing in the pictures. Thank you,

Good morning look to find these parts. Thank you

I missing part of a window lock on a sliding window. So I would like to replace both pieces of the lock. The screw holes measurements are 2 1/16. And the other piece screw holes are 2 5/16, possibly 2 1/4.

Our Simonton windows needs these window locks replaced I attached the window details in the photo

hi. You can have the stock clamps and locks for window

I need 5 of these or if you can find replacements that will work for these. The sash lock has the numbers 12895, 12883, & 12884 on it on the under side with the letter R on it as well. As for the keeper, there's no numbers on it and i'm not sure if it is the correct keeper for the sash lock. ... (cont.)

Looking for replacement lock.

Need spring assembly for a 2-0x 3-0 single hung non tilt window

Hello, my home has double hung windows manufactured by Bonneville 26 years ago. I have a number of sash locks are broken and was wondering if you had replacements. My sash locks are metal. Thank you.

We need a dozen roller replacements. They are approximately 1.5" overall length. We need 2 replacement latches. Thank you! Tom Warton

Need help finding replacement lock for this recess , keeper. Sliding glider windows horizontal series 581021\n 02 screws on lock. Are two and one sixteen apart

the picture above shows a curved handle that pulls down to lock the latch of a sliding window and the handle has broken off. Would like to purchase a replacement latch

Hi - I'm searching for replacement locks for Anderson part #12895. I need 11 of them. Thanks, Tammy

AMS-031-1 SERIES: V-70 VINYL HORIZONTAL/ VERTICAL SLIDING WINDOW I.D. No. AMS0395 U33-58/HVS

This lock is 27 years old, and the locking mechanism stopped working. Looking for a replacement part.

I lost the lock part of the sliding window latch. Can you find the replacement?

See attached pics... just need to replace the Pella window lock itself due to broken cam/lever, the keeper is fine. The measurements seem to align--2 1/16" between the lock's screw holes, and 11/16" space between the screw holes up to the edge of the window. I don't normally work with windows so don ... (cont.)