Viewing all customer Discussions for:

81-269 Lupton Roller Assembly, 1-1/4" Steel BB

Looking for a match for these rollers. They are from a sliding screen door that's about 20+ years old, im not sure of three door manufacturer. Thank you

18 mm wide. 30 mm high. 58 mm long. Single nylon roller

Hoping you can help me out. I've uploaded two photos of damaged wheel assemblies for a sliding mirrored closet door. As you can see, the brand is PE Del Mar, and the concave wheel looks to measure about 1.5-in diameter. I'm thinking it is perhaps the 9-318 roller, but I'm trying to determine if that ... (cont.)

The roller assemblies I am replacing are 1 5/8 inches high, 2 1/2 inches long, 3/4 inch wide, and have a 1 1/4 inch diameter steel wheel

This is from a Milgard sliding glass door that is about 30 years old. the outer portion measures 2 1/4 inches long. the width is 3/4 with 1" steel wheels

Inscription- Del Mar Eng. Long Beach, Cal. Pat. Pend Sliding glass door roller 3/4" wide. 1 1/4" tall. 1 1/2" diameter metal wheel.

Hi there Please let me know if oyu carry this type of roller. I need to know if you have installations instructions as well. Thank you

In need of replacement rollers for a Milgard sliding glass patio door purchased in 1985. There is a picture of door with the serial(?) numbers. The best we could see are the following numbers...USV 832332 Y133A2 16CFR1201E

This is the runner of an old sliding door that used to go to a patio and now goes to an extension room ok the house, so interior. There are to of them, single roller each. I've tried finding parts at all of the box stores, but nothing seems to be the right one. please help.

Having a hard time finding replacement wheel.

Text on roller: DEL MAR ENG. LONG BEACH, CAL. PAT. PEND.

I need 2 of these. Possibly 81-269.

2.25in L x 1.1875in H x .76in W metal wheel 1.25 OD

Need replacement wheels

I REQUESTING ASSISTENCE WITH GETTING THE CORRECT TRACK AND REPLACEMENT TRACK FOR A SLIDEING GLASS DOOR. THE HOUSE WAS BUILT IN 2007 AND I'M ASSUMING THE DOOR IS ORIGINAL. I RECENTLY ATTEMPTED TO TRY A PRIME LINE D 1527 ROLLER ASSEMBLY HOWEVER IT WAS 1/4 INCH TOO NARROW FOR THE BOTTOM OF THE DOOR FRA ... (cont.)

L: 2- 5/16" H: 1- 3/16: W: 3/4" Wheel Dia: 1- 1/8"

The bottom hole is for the adjustment screw. The top hole is for the frame screw. They're offset, front to back about an 1/8".

Can you tell me the correct replacement for this part

"Guardian" is stamped on the glass but I'm not sure if that is the mfg of the door or just the glass. - Wheel = 1.125" Dia - Width = .715" Widest - Width of dimples = .885" - Length = 2.47" - Length with tab = 2.64" - Height 1 = 1.2" - Height 2 = 1.42" - Height including wheel = 1.5" - Distance b ... (cont.)

Hi there, looking for a replacement roller