Viewing all customer Discussions for:

81-269 Lupton Roller Assembly, 1-1/4" Steel BB

Looking for 2 of these from a 1980's sliding glass door.

Older sliding glass door wheels needed (4)

Hello,It looks like you are experts, and I'd like your help to find replacements for these old wheels for a heavy glass sliding patio door from 1986. I would need two of them. The dimensions I recorded:- Wheel is 1/4 inch wide, and was 1.25inches in diameter.- Wheel center point is 1/2inch from the ... (cont.)

Hello, I'm looking for 2 rollers (ball bearing type) and a retrofit track to replace the worn parts. Roller dimensions: -Wheel: concave 55/64" with 1 1/8" shoulders -Dimple width: three dimples measuring 61/64", 31/32" and 63/64" each -Housing width: 3/4" -Housing height: 1 11/64" -Housing length: 2 ... (cont.)

They looked like rollers Code 81-018. Is this likely the rollers that Milgard would have on their sliding doors in 1989? The sliding door is 3 x 6.5 feet.

I've tried several primeline replacement and they are either too big, or the roller doesn't raise and lower correctly. These are the type that are sandwiched in between the bottom and side frame rails and attach via the long tab. I have since notched out the bottom of my door so I can remove and rei ... (cont.)

Hello, I am having trouble finding a suitable replacement for this roller. The only markings are on the wheel itself " S&S" and "VB-38". The wheel is 1 1/2" diameter. Thank you

1- 3/16 H x 2-5/16 L 11/16 W Wheel is 1-1/8

Wheel = 1.08 Length = 2.32 With = 0.71 H = 1.24 Three dimples on each side

Hello! I'm trying to find a replacement roller for my sliding glass door. I purchased what was suggested at Home Depot. I was not confident with the "assistance" at the time and do not think the part fits correctly. I was hoping a professional at a business that specializes in these parts could help ... (cont.)

We need to replace the sets of rollers on our Milgard patio sliders. House was built in 1991 and these the original sliders and rollers. The stamped number in the door frame appears to be: MT 1 A.L.I (or T) CBA. Do you carry these rollers? Thanks, Kevin

Hello, my name is Jason. I am looking for replacement part needing your help. I see a small print it says Del Mar Eng. please let me know if you carry these and how can I order from you.

Do you have these in stock? Originally purchased 81-039 and they're the wrong size. 81-093 is close, but it's a smaller roller, does that matter? The roller on the original is 1.5 inch, so it's larger.

Hi! I need 4 of these. I have heavy mirrored doors on my closet and I need a replacement track too 97" concave steel

The only writing on this part is; Del Mar ENG. Long Beach, Ca. Pat. 3,670,357

I'm looking to see if someone can help me identify this roller assembly Thank you

Hello, hope these pictures will give you an idea of the roller type I need. The measurements of L 2.25 x H 1.5 x W 0.75 are approximate.

I need to know how to find these rollers so I can buy new ones

I have no other information. Sorry. Thsnk you for your time

Hello, I'm looking for glass patio door rollers with, "DEL MAR ENG, LONG BEACH, CAL, PAT PEND. script mark on the body. I included the dimensions in attached pictures. Please let me know if you have any questions Paul