Viewing all customer Discussions for:

32-339 1" Drawer Slide Spacer

Do you carry replacement for this 1 inch drawer spacer? Thanks, John

The piece I'm holding in the photo is broken. It is in my pantry cabinet drawer that slides out.

Front bracket is for right side of knife drawer that has no right panel or wall as the drawer is over a large cupboard below. The screw goes in the back of the front wood frame of the drawer on the right. These are Kraftsman cabinets

I need to replace the part in the left in the photo which shows the two parts side by side. I ordered the part on the right thinking it was the right one, but it is too small?

Do you have anything to replace the bracket below? I don't care if it is attached to a guide rail (sorry, I don't know the correct term). The rail is 19 7/8" or so long (20"?). Please let me know. Anna Bronnenkant'

I just placed an order and want to confirm it is the right part. These were installed in 1998. Thank you!Ann

I want to be sure I have selected the correct part to replace the spacer - I placed one in my cart but look forward to your opinion based on the attached photos/

Its plastic and you screw the long arm piece into it but unfortunately its cracked.

This is a hinge spacer that has 5 holes to mount it to the cabinet & 2 holes to mount the hinge to. Would you carry any of these?

Need 5 sets

Looks like a spacer that keeps the tray guides away from the sides of the cabinet.

My wife put a little too much weight on the shelf on the front left mounting bracket broke. It appears only the plastic part is broken so only that needs replaced. Neither the cabinet wall nor the long metal part appear damaged. I have attached a picture of where it mounts to the inside wall of the ... (cont.)

Looking for plastic part that holds track . I have a few that broke

Hi, I ordered 32-339. 1" spacers. I can't modify them successfully to work. Do you have 3/4" or even 1/2" available. I need 12 pieces. Thank you, Nigel

Hi my bracket broke off and I can't find it anywhere. Hopefully u can help . I've attached pics of it and the sticker of the cabinets . Thanks

I have 4 plastic mounts for a cabinet tray glide. These mount on the side of the tray to the side walls of cabinet. Do you have 4 of these?

Measures 2 inch length by 3/4 inch width and 1-1/4 inch height

In need of a spacer that holds slider on drawer shelf in pantry cabinet. No identifying information or markings on the plastic spacer. Unsure of the distance between cabinet wall and slider. Would like the same part to replace broken spacer. If the part is unavailable, would like ideas or options ... (cont.)

Good morning. I am looking for 4 replacement parts for a sliding drawer that holds pots and pans. My current piece is cracked due to load over time. Others have a similar issue. Color match would be nice not important. The measurements on the photo are overall length. Can you please help me out. T ... (cont.)

Can you tell me which part can replace this? I need 6 of them.