Viewing all customer Discussions for:

23-270 47" Bottom Concave Roller Track

Need a base plate for a sliding mirrored closet door.

Hi I'm trying to find a replacement bottom track for my Butchmin industries bypass closet door. Is this still available? Thank you much, Chris

floor track for mirror closet doors. 3" inch W 1.5 Inch between rail 92" L made aluminum

Hello. I've included a picture of my existing 3" wide track which is worn and in need of a replacement. The width of my closet is 77 1/2" and the height is 95". The existing rollers are convex and ride on the two rails you see in the picture. Can you assist me with a replacement please. Thank you i ... (cont.)

Hi I need to replace bottom track on closet mirrored doors. Also need wheel assy as pictured with track. I need 10 ft of track and 2 wheels. Thanks let me know if any ?

I am looking to replace this track on the other side of the closet which has bowed in and out of whack. The length of track is 84 inches. It has concave wheels.

double sliding mirror closet door track

I need a track for a Mirrored closet door

What kind of track do these rollers and bipass sliding glass doors use? The original got thrown away and I can't find one that fits the wheels.

Hello, I have a monarch mirror door AFG161290. I need 8ft of track, rollers for 2 doors and the plastic guides for the top. Can you help me with placing an order. I have supplied photos of all

Hi... we need to replace this existing track with a lower profile track. The closet doors are mirrored and on two wheels that ride atop the track... Can you let us know what track you sell that could replace these please. The length we need is 104 3/4" and understand we may need to join two tracks ... (cont.)

Lookin to replace a 48" track and rollers

Possible to order this part ?

Hi, no part numbers, doors are likely 20 years old. Thanks for your help

It is just over 3" with the rails being an 1 1/2 split by 9' long

Hi, looking for a replacement track for these doors. The current track is bent and was cut too short by contractor. Thanks! Overall track width is about 3 5/8" and 47.5" long. I included the wheel part if that helps to identify the needed track better.

I purchased a mirrored closet door track. I thought I ordered a 72 in track but received a 48 in track

We need to order two a bottom tracks.

Which track is compatible with the 23-092 roller? The center measurement between the two rails on my current track is 1 5/8". I purchased a track from Lowes and the guard rails on each side were too high and the roller wheel could not reach the rail.

The track is 46 5/8" long x 3" wide (a tish under) Do you have this part in white?