Viewing all customer Discussions for:

23-270 47" Bottom Concave Roller Track

I ordered and received part 23-240, which is approximately 2.6 inches wide by 4 ft long. Looks different than original part. Picture show part & is approx 3.6 inches wide. Need to replace that part. Please advise

Please confirm that track 23-240 is the proper replacement for the track. Attached are pictures of the track and roller. Thank you!

45.5 in long, and about 3.25 inches wide

We purchased a home that has a Stanley/Monarch bypass mirrored glass closet door system. It is missing (1) upper 48" track. Track is 3 3/8" wide, 1 1/2" deep with 1 1/2" between rails. Toll free number on sticker no longer works; all numbers associated with the door system is at the bottom of the s ... (cont.)

I am attaching a couple of photos. Could you advise me on what I should order for 4 replacement sliding mirror door rollers and a replacement threshold.Thank-you very much.Dennis

I have been reviewing several submissions for people trying to find replacement bottom track for Monarch closet doors. I have looked at several of the tracks that you have recommended and several appear to match except for width measurement. The 23-270 looks like it would match except the width on ... (cont.)

Hello,I have 4 closets that are 47" wide. The tracks are severely damaged and corroded so it hard to find an exact measurement. I have looked at your sight and could not figure out which track and rollers I need. Is it possible to tell from the photo? Please let me know if there is any other infor ... (cont.)

I need to buy a replacement for this bottom track, aprox 4 tracks 2 @ 4ft and 2 @ 70 3/4"

I am trying to replace the mirror track. However, I am not sure which mirror track this is. Can you take a look at the photos and let me know which mirror track this is? Thanks, Bill

During a remodling project our mirrored closet door track and bottom rollers were lost. Can you help us find replacements? I am including a photo of the top roller as well as the space where the bottom roller used to be installed. The screw holes are about two inches apart. We'll need a bottom track ... (cont.)

As you can see these tracks are a mess and need to be replaced. please let me know if you have a 47inch track that i could purchase Thanks Bonnie

I need to know what kind track and roller for a Monarch Mirror closet door to order.It is a sliding door. 48inch track is needed.

I ordered track for my doors it was item #23-240. But I need to order bottom roller for it . The ones I have will not work what items will I need to order that will work.

the rail is 3' wide and 4' long. need a replacement aluminum color

I just obtained some Stanley/Monarch 24" mirror bypass doors from a friend, and I haven't framed the opening for the door yet. How do I size the opening for a set of bypass doors?

The bottom Track is 3.25 inches wide overall and the distance between the spines that the concave wheels roll on is 1.75 inches. The track is 47 inches wide. Can you help me replace this track?

Please review the enclosed photos and let me know what replacements can work for me

I need to replace the Monarch mirror door track for three pieces, length are 2 for 67.5 inc, 1 for 47. 1/4,inch. Please See attached photo. I think should be model 23-241, but one of them seems like they squeeze it to be narrower. Is the photo show the products should be the same model? ... (cont.)

Can you tell me what style this is? Mary Anne

Replacement tracts