Viewing all customer Discussions for:

26-410 Tilt Latch Pair, 1-13/16"

HI, do you have this one, window latches?

Screw hole centers 1 3/4" Length 1 7/8" Width 3/4"

I need 30 of the above window tilt latches

2" 7/8 long. 3/4 wide. 1" 13/16 center to center screw holes. Overall length does not include spring loaded lock.

Hi--I recently purchased a house and almost all the window tilt latches are broken due to the sun here in the southwest. The #26-410 is closest in measurement to my old latches. The only difference is the depth. My old latches are 1-1/2" deep and the #26-410 are only 13/16" deep. Do you think th ... (cont.)

I have Allenco 3700 windows that I need tilt latches for. I have the following information: 1 3/4 hole center to center 1 1/8 front hole center to tounge 3 1/4 long x 1 wide

Looking for replacement. My green gloved fingertip at bottom of image.

The latch which holds the window pane to the frame has been broken, attached are pictures

The screw holes are 2 in apart and the whole part is 3 in long . Cindy

Holes are 2 inches apart, width is 1 inch, length is 3 1/2 inch, length from right hole to end is 3/4 inch. I believe it is an Ellison window.

Having trouble finding It is 3/4 wide 3 in long holes are 1 3/4 apart center Need 9 sets

I ordered part no 26-078 and 26-079. They are just a little too thick like maybe 1/32 of inch and not oval in shape. This is for a window that is 21 years old, double hung. Do you also sell the self tapping screws if I can't find any the right size at Home Depot?

I can not find this tilt latch on your site. Do you have it? I need a right and left pair. Thank you.Terry

Hello I'm looking for a replacement latch. I was informed by a local store that said you guys might have the part. Please take a look at the attached photos and let me know if you have that latch.

I am looking for a set of 2 Alenco white tilt latch, 2 15/16: x 13/16" V2807, 2 7/8" length, 1/4" thick with center mounting hole to center mounting hole measures 1/13/16"

Latch is 3 1/2" long by 1" wide. The area between the holes (center), is 2 ". I haven't been able to find a match, can you help? My house was built in 1998, & builder is deceased, unable to find any information on the windows or sashes. Thank you.

Hi, I have 2 windows with broken tilt latches that I need to replace. I have attached photos with measurements. Will appreciate your help

Sent pictures making call

no markings on lock- not sure window brand top mounted not recessed rounded corners on one end 2" screw holes 2 15/16 long 11/16 wide Can an universal latch work? can replacement e wider as long as screw holes match up?

Picture would not upload , old latch is 1.25 inch by 2.75 inch long with the screw holes 1 and 13/16 apart. The distance from the screw hole to the edge is 5/8 inch. Swisco 26-410 is closest except for color and width... want your opinion. Finger slider is in sand color. Thanks, Craig. ... (cont.)