Viewing all customer Discussions for:

10-324 24" Shower Sweep With Drip Rail

I have a drip rail that is missing on my shower door in the house I just moved in to. It is 25" long, has two screws, and the door swings out. Would Product Code: 10-324 work for me, or do I need to go a different direction?

Greetings, looking to replace the sweep from the attached photos. The piece is approx 21.5" long. It looks like it was attached with double sided tape and the screws held the drip trim piece in place. Thanks, Bret

I am looking for a replacement for this broken glass shower door sweep. It is approximately 23.5" long, with two screw holes, approximately 17.5" apart. Do you have anything that matches this configuration?

here is a picture of mine the drip pan is on the inside of the door and I need to know if this one will fit mine because from the left end to left screw is about 3 1/4 inches and on the right screw to right end is 2 1/2 inches. And from screw to screw is 20 3/8 inches apart. And the tong is ... (cont.)

I am looking to get a replacement seal for bottom of shower door. The shower door is a 24 3/4 inches. I may end up replacing the entire dripedge. The hinge on the door is on the right hand side when looking at door not sure if that matters. Please advise.

I have a cheap plastic drip cap shower sweep that's broke. It was put on with glue. I was wondering if you had one that didn't have the screw holes like 10-324.

I need help finding a sweep for this 35 year old door. The frame measures 23.5 inches wide. The door is .5 inches thick.

How many fastener holes are on this drip rail? Would like to know how many 33-071 screws to buy but this information is not stated in the description of the drip rail.

Where can I get a replacement of this type of aluminium sweeep? 21.5" long, 1st hole- 4" from edge, then another 19" and has another hole (or 2.5"form another edge). The bottom L is about 5/8", about 6/8" slight bend.

Our shower door leaks. We removed the metal piece at the bottom an found the vinyl insert was worn away. The piece screws onto the bottom of the shower door. Can you provide either a replacement vinyl or the whole metal piece with vinyl that will fit the door? Length - 20-5/8" by 3/4" ... (cont.)

Hello, I'm looking for replacement shower door sweep. I cannot see any markings with name or number. Door is about 15 years old. Entire sweep is 21 1/2 inches long, 1 9/16 tall. The portion that goes into the aluminum grove is 3/8" width and is semi circular. See attached picture. ... (cont.)

I need to replace my shower door sweep. The door is 21.5" wide and 1/2" thick (see attached photo). Which part do you recommend for replacement? I don't see any screws on the current sweep...does this mean it was glued or caulked in place? If so, how do you recommend I fasten the replacement? I' ... (cont.)

Swisco's 10-324 (with #6 33-071 fasteners)did the trick for replacement of Shower Sweep and Drip Rail dilemma! Two additional points: 1) Recommend anyone buying the 24"er be prepared to snip off 1/2 inch in order to fully close the shower door. I did not own an aluminum metal shear, ended up ... (cont.)

I have a fiberglass one piece corner shower stall unit,the current shower door drip rail does not extend back into the shower stall,because the hinged shower glass wall is not straight to the door it was designed taking a 45 deg. turn,so when the door is opened at 90 deg. the water drips on to the ... (cont.)

I have a 24" framed shower door that needs the drip deflector replaced. No fasteners, old one adhesive attached. Please advise.

the profile of my shower door sweep includes a drip tray - do u guys have anything thats comparable? It also has a magnetic strip that is destroyed now after 10 years. I noticed most of the sweeps u have have vinyl - do u have an option with magnetic strip? assuming 10-324 is the matching item - ... (cont.)

We are renovating a shower and would appreciate your help in identifying (and replacing) the sweep (19-3/8"), drip rail (21-3/8"), and cap rail (20") pictured on the attachment. The shower door is probably over 20 years old. There are no names, numbers or markings on it.

Do you have any models without pre-drilled holes ?

I need help finding this shower sweep. The tongue that slides in the grove of the shower plate is 1/4 wide see first image. The actual width of the sweep is 3/4 inch and it is 23 inches long.

Hello, Can I use a frameless shower door sweep like 10-328 or 10-331 depending on glass/door frame size to replace a shower door sweep like one that like 10-324, 10-325 or 10-326? The frameless sweeps look/seem so much better and appear easier to install. I appreciate your help and look ... (cont.)