Viewing all customer Discussions for:

10-327 36" Black Vinyl Sweep

I need to replace the rubber sweep as the black rubberis deteriorated. Do I need to replace the entire rail or can I just replace the rubber? The rail measures 25". Image attached. Thanks.

Dear Swisco, I need a replacement shower door seal. And I buy 2 for you and not working. Can you help me how I can retur the last one I buy to you guys back .can you let me now what is the correct seal I need thanks you

I am looking for replacement rubber sweeps for these approximately 30 year old Pella French Storm doors in the pictures. The metal holding the sweep is approx 7/8" wide and the rubber is approx 3/8" wide, making the total installed sweep width approx 1-1/4" and a length of 27" for each door sweep. ... (cont.)

Missing the gray slim rubber seal it came off ripped when opening & closing door

We need to replace plastic inserts on sliding door

I have one of your shower doors, and they vinyl sweep is no longer good. I'm trying very hard to replace it, but I can't seem to find one shaped like the one I'm replacing. Any help would be greatly appreciated! David

The glass door is 1/4" thick and 66 3/4' tall: This needs a flap to seal the water from coming out of the shower. The door frame has a 1/4" T shaped slot that the previous sealer was contained. The pictures of the door sweep shows 3 screws that locks in the sweep bar. I sent you a copy of the h ... (cont.)

The space between the bottom door frame and the shower frame is about 7/16"; when I mount your 10-325 how far below the shower frame should the sweep (10-327) be located? Want to make sure before I start drilling mounting holes. Thanks for your help! Mike

Hi, My shower is a framed stall door. There is no seal on the bottom of the door itself. Instead it is in the frame. It appears to be a bulb and is mounted in a track. The only way I could get it out I believe would be to remove the frame. Even then I'm not sure I could find a replacement piece. ... (cont.)

does this come with the rubber sweep and if so what is the deminsion from bottom to top?

The photos are my shower room door. It needs the bearing to close the door tightly. The diameter of the hole is about 0.7cm and the total diameter (including outside cover?) is 1.2 cm. Also, I need to attach blockage to the bottom of the door to block water leakage. It was consisted with aluminu ... (cont.)

I need to replace sweep on my shower, I need help identifying the manufacturer. I'm not sure if the sweep slides out or if I have to replace the drip rail also. It does not screw on.

I am looking for a replacement for this broken glass shower door sweep. It is approximately 23.5" long, with two screw holes, approximately 17.5" apart. Do you have anything that matches this configuration?

Unfortunately the 10-327 didn't work, just not long enough. I thought it would cover but it didn't. I have to return this, and will put it back in the same packaging that you sent it to me in with a copy of my receipt. What I need is that same exact thing but 1.25" instead of .75". Do you have th ... (cont.)

I need a sweep with 1/8th inch round bead and 1 and 1/4 sweep. Do you carry anything like this????

Do you have a 10-327 type sweep that's longer than 3/4"? I need the sweep to be 1. ".

Hello, I'm looking for replacement shower door sweep. I cannot see any markings with name or number. Door is about 15 years old. Entire sweep is 21 1/2 inches long, 1 9/16 tall. The portion that goes into the aluminum grove is 3/8" width and is semi circular. See attached picture. ... (cont.)

Enclosed are pictures of the outside, inside and end views of my shower sweep. It measures 20 5/8 inches long and the rubber itself is 19 1/2 inches. It is attached with 4 screws. What can I order to replace it?

I have a metal shower door sweep with metal drip rail with two screws for a hinged shower door. The sweep is 26-3/4" and the screws are about 2-3/4" from the ends. can you help me get a replacement part? I can't cut one myself. thank you.

What shower door sweep do I need.? Groove is round and diameter seems to measure 1/8 " Pics included .