Discussions for 84-091M : SWISCO.com

Do you sell this roller with an "open" hook back part?

The screen rollers for my Milgard sliding glass door are making it difficult to slide the screen open. I can't seem to find this roller on your site. You'll see that the connecting point on my roller is an open "hook," while yours is a closed tab. Maybe the design has changed or there is an equivale ... (cont.)

rollers for patio door screen

Hi my patio door screen has is showing alumco aluminite. This patio door and screen was installed 15 years ago. I cannot find a replacement screen so I need to repair the one I have.

Roller for jel-wen patio screen door

Need 2 replacements

adw 8 series 311/312

I have an adw 8 series 311/312 screen door that my new dog just took out. The screen remained intake however the rollers broke off the plastic bracket and fell out. I need 4 brackets and wheels so I can fix it

Rollers for Patio doors

We need to replace these rollers but not sure what to order we found something simialr but is there a housing that goes with it?

Sliding screen door corner with wheel.

I typed in the part number on the part 911347). Just looking for two wheel assemblies. After searching your site, it appears I need to wheel assemblies, your part number 84-091M. Metal wheel at 1/1/4 diameter. Couple images are attached. Let me know if you agree and I will order two of them.We have ... (cont.)

Plygem Sliding Screen Doors

Need to replace rollers

Patio Door Roller

Hello, Help! Have been trying to figure out which type roller I need for patio door on Condo complex... I only have this picture available....What I read on door frame was 3101 SGD MFR: HH-1 if that helps.... Hope you can tell me which roller is needed.... Thanks

Screen door wheel

Is for slide screen door wheel. The case housing is 5/16.

Screen Door Roller

Screen Door Rollers 1" diameter x 1/4" wide. Can't figure out how to remove it. I've tried backing adjusting screw out, screwing adjusting screw in and unit won't budge. It doesn't appear to be the type that clips on to pins in the aperture. No apparent markings

Patio door rollers. complete units if possible

Rollers needed. Corners also. Thank you Joe

+4

screen door wheel height adjuster

the screen door is used on a atrium door. the adjustment of the height of the door/force down on the roller wheels is from the side edge of the door. adjusting the philip head screw on the side rotates angle part that pushes the wheel. several of the angled pieces are broken and I would like to f ... (cont.)

+1

Screen Door Corner

The pics show the exploded view of my original corner braces and rollers. I couldn't find a match. They also seem very flimsy with just a thin connection between the angle. Is there a quick replacement or something better? I did buy 4 corners, the 95-248's, that I hoped would work but I'm not if any ... (cont.)

replacement rollers for slider screen doors

We have what we believe are Anderson sliders. This is the label on the inside frame of the slider and what the roller looks like. Can you help find replacements?

Patio screen door lower corner!

Patio screen door lower corner. I sure appreciate if I could buy two of these!

Unknown

I have this screen with bad rollers and I need to identify the rollers and know if I can get them out and replaced. I am concerned that I will not be able to get them back.

Looking for screen door roller replacement for Jen Weld Builders vinyl SGD door

Looking for screen door roller replacement for Jen Weld Builders vinyl SGD door. It only has one roller, no adjustment screw. The door is 20 years old. Thanks for your help. Paul

+4

identification of a screen door roller

the wheel diameter is 11/4 inches The overall width is 1/4 and the wheel thickness is 3/16.

Sliding screen door roller

I can find what looks similar but where mine has a hook others have a loop

Screen door corner and roller

The corner part is plastic and the nob the roller attaches to is broken. the roller is nylon or plastic. Can I order these parts? I watch a video and the parts looked like cast metal for the corner and roller. Will those parts work to replace my plastic ones. How do I order parts? ... (cont.)

Viewing all customer Discussions for: 84-091M Screen Door Roller, 1" Steel Wheel

Viewing all customer Discussions for:
84-091M Screen Door Roller, 1" Steel Wheel