Viewing all customer Discussions for:

39-417 Tie Bar Guide

I am looking for tie bar for interlock roller 18.9 (480.1mm) and plastic clips (holder) Thank you.

We have ROW casement windows; we would like 3 or more of the plastic piece that holds the long rod that catches the window and pulls it in when locking it. Also, we need the rod...it measure 50 3/4. Also, the screw to the crank set up has come out of the bottom of the window. Any suggestions fo ... (cont.)

I was wondering if you had any of these old style butterfly clips? We have a lot of customers that need these. Thank you Karen

Clip that helps window close

Hi looking to replace guide/bracket (white plastic bracket/guide) for locking bar/mechanism in BF Rish vinyl dbl casement/crankout window.... I attached pics of bad and good one..we need replacement for outside of house-LEFT side of dbl casement window. Thank you! Billy

One off my window locking plastics hinges has broken off as you can see in the picture. I don't know what you call it, but it supposed to hold the window metal rod in place when you lock it. Plastic part help the rod pull the window in when you push the locking handles down.

I am looking for the curved keeper part that holds the side opening window latch bar in place on our Accu-Weld Garden Window. The part is about an inch long with two screw holes. It mounts in the window casing area to hold the latch bar up and in place so the window can be locked and unlocked. There ... (cont.)

The white four holes clip broken.

clip broke need replacement, Truth, marking with the #31858...on picture please help

Broken locking mechanism of window

This is the broken part, I ordered the tie bar on your website, it's not a perfect match, but do you think it will work? If so, I will need 4 more. Also, i need to replace the crank, they are certainteed windows.

I' m trying to find some Tie Bar guides for a HURD Casement window. Can you please help me out?

They are Weather Shield Casement windows from around 1998. I included the numbers on the windows in the pictures. We need the plastic pieces that go around the locking bar.

I couldn't find any marking in the window. I need to replace the plastic piece (circled in red) that keeps the operator channel in place because it was chipped away at the end. In fact, I am willing to replace the whole operator channel if you can identify the exact model because it got bent from fo ... (cont.)

Hi, I have Jeld-wen casement windows. The picture attached shows a white plastic piece that holds the metal bar that locks the casement window. On one of my windows, this plastic part is broken and I can't close my window. I was hoping to find the part and order a bunch of them to have some spares ... (cont.)

windows are certainteed white vinyl ---new castle xt series the bracket is 1 3/8" deep and 3/4 " tall if ya will have seen a few that connect (Screw in ) to the back and these are attached to the side. also looking for a couple of operators both ( if you are on the inside) hinge on the left. ... (cont.)

This part holds in the window stay. I believe the windows are Atrium windows. Thanks!

The part holds the locking bar to my casement windows on the outside. I believe the hinge part is broken. The window does not have a name on it

I have several of these plastic pieces broken. The first picture is the piece intact and the second picture is of the piece broken. It is used to hold in the rod that allows me to lock the window. It would take less than 5 minutes to fix but I can not find the manufacturer of the window to purchase ... (cont.)

The part I am looking for is part of the locking mechanism. There are 2 of them on the non hinged side of the window. It appears to have a metal bar that slips in the part.