Viewing all customer Discussions for:

23-092 Mirror Door Roller Assembly, 1-1/8"

Recently ordered and received (4) SWISCO Mirror door roller assemblies that were TOO LARGE (SEE Item # 23-092 Mirror Door Roller Assembly, 1-1/8"...Order # 2126584), and will attempt to return them. Having searched your website, I cannot find any that might be smaller, slimmer, of compatible size th ... (cont.)

Hi, I have a 30+ year old bypass door track for mirrored closet doors. The doors are 8' tall. The track is 130" long and I think the replacement track would be 2 of the 23-272 tracks joined together. The wheel assemblies I am unsure of. I think they may be 23-092 or 23-232S. I don't think nylon whee ... (cont.)

I am looking to purchase 4 of the wheels shown above in the picture. Can you tell me if you have them. Thank you so much for your help. I am so glad I found this website Thank you Gina

Which track is compatible with the 23-092 roller? The center measurement between the two rails on my current track is 1 5/8". I purchased a track from Lowes and the guard rails on each side were too high and the roller wheel could not reach the rail.

No names or markings were found on the hardware.

We use this in a interior rolling door we manufacture

my current roller has the same measurements as 23-092, with a nylon wheel. My measure, wheel diameter 1/8, 3/4 flare, with 9/16 inches.The 23-043 diameter is 1/8 longer than my roller. Should I buy 23-092 or 23-043?For tha matching track 23-271.My door frame opening is 59.5 inch. Will 0.5 shorter th ... (cont.)

There are no numbers or markings on the wheel. It is for a mirror closet door.

I am looking for a replacement to the mirror door roller. Originally the doors had plastic coated metal rollers but the plastic broke off the metal and I replaced them with the part number 41781. I would like plastic rollers if possible the same size. I measured the roller and it was 1 1/8 inch ou ... (cont.)

I need replacement rollers for my mirrored closet doors. Mine are similar to your 23-092 but mine are only 1/2 inch wide. do yuhave anything like that?Reggie

Does the 9/16" width, include the total protrusion of the rivets of the roller? Is the roller concave? It does not appear to be in the picture. I actually need the width to be 8/16 wide overall to fit in my track, but don't think it is available. Do you have 4ea in stock Thank You Darrell ... (cont.)

See picture of bottom roller from mirror wardrobe doors

Hi, I need 4 of these closet door roller for my large 10' closet door set. These doors have a sticker on the back that reads "Buchmin Industries Z97-1-1975". They are metal wheels and closest I can find in your catalogue is 23-092. Please see photos enclosed. Thanks for your help, Pat ... (cont.)

Hi - Could you help me find the correct replacement wheels? They

I have some old sliding mirror doors need rollers which I cannot find. It shows Kilian, Toronto, CAN, Syracuse NY. Do you have this roller?

Hi, I am posting the image of the original roller on my Patio sliding door. It is a single roller with approximately 1'' diameter. I tried to replace the roller with a D-1735 ( with 1-1/4'' dia) double roller assemblies. Eventhough it fits in the door very well, I am not being able to place the door ... (cont.)